200G QSFP56 ACC Cables – www.philisun.com https://www.philisun.com Optical transceivers support <strong>10G to 800G</strong> high-speed transmission Sat, 09 May 2026 08:07:17 +0000 en-US hourly 1 https://www.philisun.com/wp-content/uploads/2025/10/philisun斐立飒-logo彩色方形-1-100x100.png 200G QSFP56 ACC Cables – www.philisun.com https://www.philisun.com 32 32 200G QSFP56 to 2×100G QSFP56 Active Direct Attach Copper Twinax Cable (ACC) https://www.philisun.com/products/200g-qsfp56-2-100g-qsfp56-acc/ Sat, 09 May 2026 07:51:16 +0000 https://www.philisun.com/?post_type=product&p=9097 Compliant with
IEEE 802.3cd, SFF-8665, QSFP MSA, SFF-8679, SFF-8636, InfiniBand HDR standard
Switch to Switch
Switch to GPU

200G QSFP56 to 2×100G QSFP56 Active Direct Attach Copper Twinax Cable (ACC)最先出现在www.philisun.com。

]]>
SPECIFICATIONS
Cable End Connector AQSFP56Cable End Connector B2×QSFP56
Jumper TypeActive Optical Breakout CableData Rate200G
Aggregate Bit Rate200GbpsLane Bit Rate50Gbps
Number of Channels4Single Channel Rate50G
Minimum Bend Radius5X Cable OD -Single, 10X Cable OD - RepeatedFactory BrandPHILISUN
Attenuation26AWG:10dB/8.5m maximum
28AWG:10dB/7m maximum
30AWG:8.4dB/5.5m maximum		Bit Error Rate≤10-12
ShieldBraid/FoilWire AWG26AWG/28AWG/30AWG
Cable TypeActive TwinaxCable OD30AWG: 5.5mm
28AWG: 6.3mm
26AWG: 7.3mm
Cable Colour/MaterialBlack PVC(OFNR)Cable Length Selection1-7meter
ProtocolsSFF8665/QSFP MSA/IEEE 802.3cd/SFF-8679/SFF-8636/ InfiniBand HDRApplication Scenarios200Gigabit Ethernet (200GbE)
Supply Voltage3.3VPower Dissipation<1.5W
Operating Temperature0 to 70℃ (32 to 158℉)Storage Temperature-40 to 85℃ (-40 to 185℉)

 

PRODUCT PRESENTATION

The PHILISUN 200G QSFP56 to 2x100G QSFP56 Active High-Speed Direct Attach Copper Cable is a high-speed, cost-effective alternative to optical transceivers for 200Gb/s Ethernet applications. Fully compliant with SFF-8665 QSFP56 MSA standards, this breakout cable connects one 200G QSFP56 port to two 100G QSFP56 ports. It delivers economical short-reach interconnections for telecom central offices and data centers.

DAC SERIES PRODUCTS

 

PRODUCTION & TESTING EQUIPMENT

 

PERFORMANCE PARAMETER
Absolute Maximum Ratings
Parameter Symbol Min. Max. Unit Notes
Storage Temperature Range Ts -40 80 ºC –
Supply Voltage Vcc -0.5 3.6 V –
Operating Relative Humidity RH 85 % –

 

Recommended Operating Conditions
Parameter Symbol Min. Typica Max. Unit Notes
Operating Case Temperature TOPR 0 – 70 ºC –
Power Supply Voltage Vcc 3.135 3.3 3.465 V –
Data Rate DR – 200 – Gbps –

 

General Product Characteristics
All performance is defined over the recommended operating environment unless otherwise specified.
Item Parameter Reference
SDD21 8dB <X < 17. 16dB @ 13.28 GHz IEEE802.3cd, Clause 136.11.2
SDD11/22 – 16.5+2*sqrt(f)dB Max. @0.05GHz-4. 1GHz
– 10.66+ 14*1og(f/5.5) dB Max.@4. 1GHz- 19GHz		 –
SDD11/22 -22+(20/25.78) *f dB Max.@0.01GHz~ 12.89GHz
– 15+(6/25.78) *f dB Max.@ 12.89GHz~ 19GHz		 IEEE802.3cd, Clause 136.11.4
SCD21-SDD21 – 10dB Max. @0.01GHz~ 12.89GHz
-27+(29/22) *f dB Max. @ 12.89GHz~ 15.7GHz
-6.3dB Max. @ 15.7GHz~ 19GHz		 IEEE802.3cd, Clause 136.11.5
SCC11/22 -2dB Max. @0.2GHz~ 19GHz IEEE802.3cd, Clause 136.11.6
ICN 3 ≤ IL≤ 7.65: 5 mV Max.
7.65 ≤ IL ≤ 26:  12.75 – 0.49 *f mV Max.
IL is the value @13.28GHz, f is in GHz		 –
COM 3dB Min. –
NEXT -40dB Max. –

 

Pin Descriptions

 

Pin Logic Symbol Description
1 – GND Module Ground
2 CML-I Tx2n Transmitter Inverted Data Input
3 CML-I Tx2p Transmitter Non-inverted Data Input
4 – GND Module Ground
5 CML-I Tx4n Transmitter Inverted Data Input
6 CML-I Tx4p Transmitter Non-Inverted Data Input
7 – GND Module Ground
8 LVTTL-I ModSelL Module Select
9 LVTTL-I ResetL Module Reset
10 – Vcc Rx +3.3V Power Supply for Receiver
11 LVTTL-I SCL 2-wire Serial Interface Clock
12 LVTTL-I/O SDA 2-wire Serial Interface Data Line
13 – GND Module Ground
14 CML-O Rx3p Receiver Non-Inverted Data Output
15 CML-O Rx3n Receiver Inverted Data Output
16 – GND Module Ground
17 CML-O Rx1p Receiver Non-Inverted Data Output
18 CML-O Rx1n Receiver Inverted Data Output
19 – GND Module Ground
20 – GND Module Ground
21 CML-O Rx2n Receiver Inverted Data Output
22 CML-O Rx2p Receiver Non-Inverted Data Output
23 – GND Module Ground
24 CML-O Rx4n Receiver Inverted Data Output
25 CML-O Rx4p Receiver Non-Inverted Data Output
26 – GND Module Ground
27 LVTTL-O ModPrsL Module Ground
28 LVTTL-O IntL/RxLOSL Interrupt. Optionally Configurable As Rxlosl Via The
Management Interface (sff-8636)
29 – VccTx +3.3v Power Supply For Transmitter
30 – Vcc1 +3.3v Power Supply
31 LVTTL-I LPMode/Tx Dis Low Power Mode. Optionally Configurable as TxDis via the
Management Interface (SFF-8636).
32 – GND Module Ground
33 CML-I Tx3p Transmitter Non-Inverted Data Input
34 CML-I Tx3n Transmitter Inverted Data Input
35 – GND Module Ground
36 CML-I Tx1p Transmitter Non-Inverted Data Input
37 CML-I Tx1n Transmitter Inverted Data Input
38 – GND Module Ground

 

PRODUCT CERTIFICATION

 

COMPATIBLE BRANDS
CONFIGURATION INFORMATION
The form can be filled in the actual website url.

 

200G QSFP56 to 2×100G QSFP56 Active Direct Attach Copper Twinax Cable (ACC)最先出现在www.philisun.com。

]]>