ACC Series – www.philisun.com https://www.philisun.com Optical transceivers support <strong>10G to 800G</strong> high-speed transmission Mon, 11 May 2026 07:38:18 +0000 en-US hourly 1 https://www.philisun.com/wp-content/uploads/2025/10/philisun斐立飒-logo彩色方形-1-100x100.png ACC Series – www.philisun.com https://www.philisun.com 32 32 800G QSFP-DD to QSFP-DD Active Direct Attach Copper Twinax Cable (ACC) https://www.philisun.com/products/800g-qsfp-dd-acc/ Mon, 11 May 2026 05:07:55 +0000 https://www.philisun.com/?post_type=product&p=9138 Compliant with
QSFP-DD MSA Rev. 5.0, CMIS Rev 4.0, SFF 8417, IEEE 802.3ck standard
Switch to Switch
Switch to GPU

800G QSFP-DD to QSFP-DD Active Direct Attach Copper Twinax Cable (ACC)最先出现在www.philisun.com。

]]>
SPECIFICATIONS
Cable End Connector AQSFP-DDCable End Connector BQSFP-DD
Jumper TypeDirect-AttachData Rate800G
Aggregate Bit Rate800GbpsLane Bit Rate100Gbps
Number of Channels8Single Channel Rate100G
Minimum Bend Radius5X Cable OD -Single, 10X Cable OD - RepeatedFactory BrandPHILISUN
Attenuation28AWG:10dB/7m maximum
30AWG:8.4dB/5.5m maximum		Bit Error Rate≤10-12
ShieldBraid/FoilWire AWG28AWG/30AWG
Cable TypeActive TwinaxCable OD30AWG: 6.9mm
28AWG: 8.1mm
Cable Colour/MaterialBlack PVC(OFNR)Cable Length Selection2.5meter
ProtocolsIEEE 802.3ck/QSFP-DD MSA/ SFF 8417/CMIS Rev 4.0Application Scenarios800Gigabit Ethernet (800GbE)
Supply Voltage3.3VPower Dissipation<1.2W
Operating Temperature0 to 70℃ (32 to 158℉)Storage Temperature-40 to 85℃ (-40 to 185℉)

 

PRODUCT PRESENTATION
The PHILISUN 800G QSFP‑DD ACC is a high‑speed, cost‑effective alternative to optical cables for 800G Ethernet applications.
It features 16 high‑speed differential pairs, each supporting data rates up to 100 Gb/s.Compliant with IEEE 802.3ck and QSFP‑DD MSA standards,this cable delivers energy‑efficient short‑reach connectivity, enabling higher port bandwidth, density, and configurability in data centers.

ACC SERIES PRODUCTS

 

PRODUCTION & TESTING EQUIPMENT

 

PERFORMANCE PARAMETER
General Requirements
Item Description Parameter Requirement
G1 Connection Testing (Capacitance Measurement) CTXy-RXy  (300µs@3V) 100n F ± 10%
G2 S hort C ircuit Testing RXXy-XXy  (500µs@3V DC) ≥ 1MΩ

 

Signal Integrity Requirements
Item Description Parameter Requirement
S1 Max. I nsertion Loss@26.56GHz SDD12 SDD21 ≤ 19.75d B
S2 Min. Cable Assembly ERL ERL ≥8.25d B
S3 Differential to Common Mode Conversion
(Up to 40GHz)		 SCD12-SDD12
SCD21-SDD21		 ≥10                        0.05GHz≤f<12.89GHz
≥14-0.3108f              12.89GHz≤f≤40GHz
PRODUCT CERTIFICATION

 

COMPATIBLE BRANDS
CONFIGURATION INFORMATION
The form can be filled in the actual website url.

 

800G QSFP-DD to QSFP-DD Active Direct Attach Copper Twinax Cable (ACC)最先出现在www.philisun.com。

]]> 400G QSFP-DD to 4×100G QSFP56 Active Direct Attach Copper Twinax Cable (ACC) https://www.philisun.com/products/400g-qsfp-dd-4-100g-qsfp56-acc/ Sat, 09 May 2026 10:04:41 +0000 https://www.philisun.com/?post_type=product&p=9130 Compliant with
QSFP-DD MSA, SFF-8636 standard
Switch to Switch
Switch to GPU

400G QSFP-DD to 4×100G QSFP56 Active Direct Attach Copper Twinax Cable (ACC)最先出现在www.philisun.com。

]]>
SPECIFICATIONS
Cable End Connector AQSFP-DDCable End Connector B4×QSFP56
Jumper TypeActive Optical Breakout CableData Rate400G
Aggregate Bit Rate425GbpsLane Bit Rate53.125Gbps
Number of Channels8Single Channel Rate50G
Minimum Bend Radius5X Cable OD -Single, 10X Cable OD - RepeatedFactory BrandPHILISUN
Attenuation26AWG:10dB/8.5m maximum
28AWG:10dB/7m maximum
30AWG:8.4dB/5.5m maximum		Bit Error Rate≤10-12
ShieldBraid/FoilWire AWG26AWG/28AWG/30AWG
Cable TypeActive TwinaxCable OD30AWG: 14.0mm
28AWG:16.0mm
26AWG:18.0mm
Cable Colour/MaterialBlack PVC(OFNR)Cable Length Selection1-7meter
ProtocolsQSFP-DD MSA/CMIS Rev 4.0/IEEE 802.3cd/SFF-8472/SFF-8679/SFF-8636Application Scenarios400Gigabit Ethernet (400GbE)
Supply Voltage3.3VPower Dissipation<0.1W
Operating Temperature0 to 70℃ (32 to 158℉)Storage Temperature-40 to 85℃ (-40 to 185℉)

 

PRODUCT PRESENTATION
The PHILISUN 400G QSFP-DD to 4x100G QSFP56 active high-speed breakout cable is designed for high-density applications. The hot-pluggable transceiver integrates 8 transmit and 8 receive channels.This QSFP-DD pluggable solution supports 400G transmission and is fully compliant with QSFP-DD MSA, SFF-8636 and SFF-8679 standards.It provides a high-performance, high-bandwidth, cost-effective interconnect solution for 400G and multi-rate applications.

DAC SERIES PRODUCTS

 

PRODUCTION & TESTING EQUIPMENT

 

PERFORMANCE PARAMETER
Absolute Maximum Ratings
Parameter Unit Min Typical Max. Notes
Storage Temperature ºC -45 – 80 –
Power Supply not Damaged Voltage V -1 – 3.6 –
 Operating Relative Humidity % – – 85 –

 

Recommended Operating Conditions
Parameter Unit Min Typical Max Notes
OperatingCase Temperature ºC 0 – 70 –
Power Supply Voltage V 3.135 3.3 3.465 –
Bit Rate Gbps – 400 – –

 

Characteristics
Item Parameter Reference
SCD21-SDD21 8dB<X<17 . 16dB @13.28 GHz IEEE 802.3cd,Clause 136.11.2
SDD11/22 – 16.5+2*sqrt(f )dB Max @0.05GHz-4.1GHz

– 10.66+14*1og(f/5.5) dB Max@4.1GHz-
19GHz

 –
SCD11/22 -22+(20/25.78) *f DB(Max@0.01GHz~12.89GHz- 15+(6/25.78)
*f dB Max@12.89GHz~19GHz)		 IEEE802.3cd,Clause 136.11.4
SCD21-SDD21 – 10dB Max @0.01GHz~12.89GHz -27+(29/22) *f dB Max
@12.89GHz~15.7GHz -6.3dB Max.@15.7GHz~19GHz		 IEEE802.3cd,Clause 136.11.5
SCC11/22 -2dB Max. @0.2GHz~19GHz IEEE802.3cd,Clause 136.11.6
COM 3 dB Min –

 

PIN Function Definitions of QSFP-DD
Pin No. Symbol Level/Logic Description
1 GND – Module Ground
2 Tx2n CML-I Transmitter Inverted Data Input
3 Тx2р CML-I Transmitter Non-Inverted Data Input
4 GND – Module Ground
5 Tx4n CML-I Transmitter Inverted Data Input
6 Tx4p CML-I Transmitter Non-Inverted Data Input
7 GND – Module Ground
8 ModSelL LVTTL-I Module Select
9 ResetL LVTTL-I Module Reset
10 VccRx – +3.3V Power Supply for Receiver
11 SCL LVTTL-I 2-Wire Serial Interface Clock
12 SDA LVTTL-I/O 2-Wire Serial Interface Data Line
13 GND – Module Ground
14 Rx3p CML-O Receiver Non-Inverted Data Output
15 Rx3n CML-O Receiver Inverted Data Output
16 GND – Module Ground
17 Rx1p CML-O Receiver Non-Inverted Data Output
18 Rx1n CML-O Receiver Inverted Data Output
19 GND – Module Ground
20 GND – Module Ground
21 Rx2n CML-O Receiver Inverted Data Output
22 Rx2p CML-O Receiver Non-Inverted Data Output
23 GND – Module Ground
24 Rx4n CML-O Receiver Inverted Data Output
25 Rx4p CML-O Receiver Non-Inverted Data Output
26 GND – Module Ground
27 ModPrsL LVTTL-O Module Present
28 IntL/RxLOSL LVTTL-O Interrupt.Optionally configurable as RxLOSL via the
management interface(SFF-8636).
29 VccTx – +3.3V Power Supply for Transmitter
30 Vcc1 – +3.3V Power Supply
31 LPMode/TxDis LVTTL-I Low Power Mode.Optionally configurable as TxDis via the
management interface (SFF-8636).
32 GND – Module Ground
33 Tx3p CML-I Transmitter Non-Inverted Data Input
34 Tx3n CML-I Transmitter Inverted Data Input
35 GND – Module Ground
36 Tx1p CML-I Transmitter Non-Inverted Data Input
37 Tx1n CML-I Transmitter Inverted Data Input
38 GND – Module Ground
39 GND – Module Ground
40 Tx6n CML-I Transmitter Inverted Data Input
41 Tx6p CML-I Transmitter Non-Inverted Data Input
42 GND – Module Ground
43 Tx8n CML-I Transmitter Inverted Data Input
44 Tx8p CML-I Transmitter Non-Inverted Data Input
45 GND – Module Ground
46 Reserved – For future use
47 VSI – Module Vendor Specific 1
48 VccRx1 – 3.3V Power Supply
49 VS2 – Module Vendor Specific 2
50 VS3 – Module Vendor Specific 3
51 GND – Module Ground
52 Rx7p CML-O Receiver Non-Inverted Data Output
53 Rx7n CML-O Receiver Inverted Data Output
54 GND Module Ground
55 Rx5p CML-O Receiver Non-Inverted Data Output
56 Rx5n CML-O Receiver Inverted Data Output
57 GND – Module Ground
58 GND – Module Ground
59 Rx6n CML-O Receiver Inverted Data Output
60 Rx6p CML-O Receiver Non-Inverted Data Output
61 GND – Module Ground
62 Rx8n CML-O Receiver Inverted Data Output
63 Rx8p CML-O Receiver Non-Inverted Data Output
64 GND – Module Ground
65 NC – No Connect
66 Reserved – For future use
67 VccTx1 – 3.3V Power Supply
68 Vcc2 – 3.3V Power Supply
69 Reserved – For future use
70 GND – Module Ground
71 Tx7p CML-I Transmitter Non-Inverted Data Input
72 Tx7n CML-I Transmitter Inverted Data Input
73 GND – Module Ground
74 Tx5p CML-I Transmitter Non-Inverted Data Input
75 Tx5n CML-I Transmitter Inverted Data Input
76 GND – Module Ground

 

PIN Function Definitions of QSFP56
Pin No. Symbol Level/Logic Description
1 GND – Module Ground
2 Tx2n CML-I Transmitter Inverted Data Input
3 Tx2p CML-I Transmitter Non-Inverted Data Input
4 GND – Module Ground
5 Tx4n CML-I Transmitter Inverted Data Input
6 Tx4p CML-I Transmitter Non-Inverted Data Input
7 GND – Module Ground
8 ModSelL LVTTL-I Module Select
9 ResetL LVTTL-I Module Reset
10 VccRx – +3.3V Power Supply for Receiver
11 SCL LVTTL-I 2-W ire Serial Interface Clock
12 SDA LVTTL-I/O 2-W ire Serial Interface Data Line
13 GND – Module Ground
14 Rx3p CML-O Receiver Non-Inverted Data Output
15 Rx3n CML-O Receiver Inverted Data Output
16 GND – Module Ground
17 Rx1p CML-O Receiver Non-Inverted Data Output
18 Rx1n CML-O Receiver Inverted Data Output
19 GND – Module Ground
20 GND – Module Ground
21 Rx2n CML-O Receiver Inverted Data Output
22 Rx2p CML-O Receiver Non-Inverted Data Output
23 GND – Module Ground
24 Rx4n CML-O Receiver Inverted Data Output
25 Rx4p CML-O Receiver Non-Inverted Data Output
26 GND – Module Ground
27 ModPrsL LVTTL-O Module Present
28 IntL/RxLOSL LVTTL-O Interrupt. Optionally configurable as RxLOSL via the
management interface (SFF-8636).
29 VccTx – +3.3V Power Supply for Transmitter
30 Vcc1 – +3.3V Power Supply
31 LPMode/T Dis LVTTL-I Low Power Mode. Optionally configurable as TxDis via the
management interface (SFF-8636).
32 GND – Module Ground
33 Tx3p CML-I Transmitter Non-Inverted Data Input
34 Tx3n CML-I Transmitter Inverted Data Input
35 GND – Module Ground
36 Tx1p CML-I Transmitter Non-Inverted Data Input
37 Tx1n CML-I Transmitter Inverted Data Input
38 GND – Module Ground

 

Electrical Pad Layout of QSFP-DD

Electrical Pad Layout of QSFP56
PRODUCT CERTIFICATION

 

COMPATIBLE BRANDS
CONFIGURATION INFORMATION
The form can be filled in the actual website url.

 

400G QSFP-DD to 4×100G QSFP56 Active Direct Attach Copper Twinax Cable (ACC)最先出现在www.philisun.com。

]]> 400G QSFP-DD to 2×200G QSFP56 Active Direct Attach Copper Twinax Cable (ACC) https://www.philisun.com/products/400g-qsfp-dd-2-200g-qsfp56-acc/ Sat, 09 May 2026 09:25:00 +0000 https://www.philisun.com/?post_type=product&p=9117 Compliant with
QSFP-DD MSA, SFF-8636 standard
Switch to Switch
Switch to GPU

400G QSFP-DD to 2×200G QSFP56 Active Direct Attach Copper Twinax Cable (ACC)最先出现在www.philisun.com。

]]>
SPECIFICATIONS
Cable End Connector AQSFP-DDCable End Connector B2×QSFP56
Jumper TypeActive Optical Breakout CableData Rate400G
Aggregate Bit Rate425GbpsLane Bit Rate53.125Gbps
Number of Channels8Single Channel Rate50G
Minimum Bend Radius5X Cable OD -Single, 10X Cable OD - RepeatedFactory BrandPHILISUN
Attenuation26AWG:10dB/8.5m maximum
28AWG:10dB/7m maximum
30AWG:8.4dB/5.5m maximum		Bit Error Rate≤10-12
ShieldBraid/FoilWire AWG26AWG/28AWG/30AWG
Cable TypeActive TwinaxCable OD30AWG: 14.0mm
28AWG:16.0mm
26AWG:18.0mm
Cable Colour/MaterialBlack PVC(OFNR)Cable Length Selection1-7meter
ProtocolsQSFP-DD MSA/SFF-8636/SFF-8679Application Scenarios400Gigabit Ethernet (400GbE)
Supply Voltage3.3VPower Dissipation<3.0W
Operating Temperature0 to 70℃ (32 to 158℉)Storage Temperature-40 to 85℃ (-40 to 185℉)

 

PRODUCT PRESENTATION

The PHILISUN 400G QSFP-DD to 2x200G QSFP56 high-speed breakout cable assembly is designed for high-density standard and composite connector configurations.This QSFP-DD pluggable solution supports 400G transmission and is fully compliant with QSFP-DD MSA, SFF-8636 and SFF-8679 standards.It delivers a high-performance, high-bandwidth, cost-effective interconnect solution supporting 400G applications across various rates.

DAC SERIES PRODUCTS

 

PRODUCTION & TESTING EQUIPMENT

 

PERFORMANCE PARAMETER
Absolute Maximum Ratings
Parameter Min. Max. Unit
Storage Temperature -45 80 ℃
Operating Relative Humidity – 85 %
Power Supply not Damaged Voltage -0.5 3.6 V

 

Recommended Operating Conditions
Parameter Min. Typ. Max. Unit
Operating Case Temperature 0 – 70 ℃
Power Supply Working Voltage 3.135 3.3 3.65 V
Bit Rat – 400 – Gbps

 

Characteristics
All performance is defined over the recommended operating environment unless otherwise specified.
Item arameter Reference
SDD21 8dB<X<17.16dB @13.28 GHz IEEE802.3cd, Clause136.11.2
SDD11/22 ‘-16.5+2*sqrt(f)dB Max @0.05GHz-
4.1GHz
-10.66+14*1og(f/5.5) dB
Max@4.1GHz-19GHz		 –
SCD11/22 – IEEE802.3cd, Clause 136.11.4
SCD21-SDD21 -10dB Max @0.01GHz~12.89GHz
-27+(29/22) *f dB Max
@12.89GHz~15.7GHz
-6.3dB Max. @15.7GHz~19GHz		 IEEE802.3cd, Clause 136.11.5
SCC11/22 -2dB Max. @0.2GHz~19GHz IEEE802.3cd, Clause 136.11.6
COM 3 dB MindB –

 

PIN Function Definitions of QSFP-DD
Noz Symbol Level / Logic Description
1 GND – Module Ground
2 Tx2n CML-I Transmitter Inverted Data Input
3 Tx2p CML-I Transmitter Non-Inverted Data Input
4 GND – Module Ground
5 Tx4n CML-I Transmitter Inverted Data Input
6 Tx4p CML-I Transmitter Non-Inverted Data InputPin
7 GND – Module Ground
8 ModSelL LVTTL-I Module Select
9 ResetL LVTTL-I Module Reset
10 VccRx – +3.3V Power Supply for Receiver
11 SCL LVTTL-I 2-Wire Serial Interface Clock
12 SDA LVTTL-I/O 2-Wire Serial Interface Data Line
13 GND – Module Ground
14 Rx3p CML-O Receiver Non-Inverted Data Output
15 RX3n CML-O Receiver Inverted Data output
16 GND – Module Ground
17 Rx1p CML-O Receiver Non-Inverted Data Output
18 Rx1n CML-O Receiver Inverted Data Output
19 GND – Module Ground
20 GND – Module Ground
28 IntL/RxLOSL LVTTL-O Interrupt. Optionally configurable as RxLOSL via the
management interface (SFF-8636).
29 VccTx – +3.3V Power Supply for Transmitter
30 Vcc1 – +3.3V Power Supply
31 LPMode/TxDis LVTTL-I Low Power Mode. Optionally configurable as TxDis via the
management interface (SFF-8636).
32 GND – Module Ground
33 Tx3p CML-I Transmitter Non-Inverted Data Input
34 Tx3n CML-I Transmitter Inverted Data Input
35 GND – Module Ground
36 Tx1p CML-I Transmitter Non-Inverted Data Input
37 Tx1n CML-I Transmitter Inverted Data Input
38 GND – Module Ground
39 GND – Module Ground
40 Tx6n CML-I Transmitter Inverted Data Input
41 Tx6p CML-I Transmitter Non-Inverted Data Input
42 GND – Module Ground
43 Tx8n CML-I Transmitter Inverted Data Input
44 Tx8p CML-I Transmitter Non-Inverted Data Input
45 GND – Module Ground
46 Reserved – For future use
47 VSI – Module Vendor Specific 1
48 VccRx1 – 3.3V Power Supply
49 VS2 – Module Vendor Specific 2
50 VS3 – Module Vendor Specific 3
51 GND – Module Ground
52 Rx7p CML-O Receiver Non-Inverted Data Output
53 Rx7n CML-O Receiver Inverted Data Output
54 GND – Module Ground
55 Rx5p CML-O Receiver Non-Inverted Data Output
56 Rx5n CML-O Receiver Inverted Data Output
57 GND – Module Ground
58 GND – Module Ground
59 Rx6n CML-O Receiver Inverted Data Output
60 Rx6p CML-O Receiver Non-Inverted Data Output
61 GND – Module Ground
62 Rx8n CML-O Receiver Inverted Data Output
63 Rx8p CML-O Receiver Non-Inverted Data Output
64 GND – Module Ground
65 NC – No Connect
66 Reserved – For future use
67 VccTx1 – 3.3V Power Supply
68 Vcc2 – 3.3V Power Supply
69 Reserved – For future use
70 GND – Module Ground
71 Tx7p CML-I Transmitter Non-Inverted Data Input
72 Tx7n CML-I Transmitter Inverted Data Input
73 GND – Module Ground
74 Tx5p CML-I Transmitter Non-Inverted Data Input
75 Tx5n CML-I Transmitter Inverted Data Input
76 GND – Module Ground

 

PIN Function Definitions of QSFP56
Pin No. Symbol Level / Logic Description
1 GND – Module Ground
2 Tx2n CML-I Transmitter Inverted Data Input
3 Tx2p CML-I Transmitter Non-Inverted Data Input
4 GND – Module Ground
5 Tx4n CML-I Transmitter Inverted Data Input
6 Tx4p CML-I Transmitter Non-Inverted Data Input
7 GND – Module Ground
8 ModSelL LVTTL-I Module Select
9 ResetL LVTTL-I Module Reset
10 VccRx – +3.3V Power Supply for Receiver
11 SCL LVTTL-I 2-Wire Serial Interface Clock
12 SDA LVTTL-I/O 2-Wire Serial Interface Data Line
13 GND – Module Ground
14 Rx3p CML-O Receiver Non-Inverted Data Output
15 Rx3n CML-O Receiver Inverted Data Output
16 GND – Module Ground
17 Rx1p CML-O Receiver Non-Inverted Data Output
18 Rx1n CML-O Receiver Inverted Data Output
19 GND – Module Ground
20 GND – Module Ground
21 Rx2n CML-O Receiver Inverted Data Output
22 Rx2p CML-O Receiver Non-Inverted Data Output
23 GND – Module Ground
24 Rx4n CML-O Receiver Inverted Data Output
25 Rx4p CML-O Receiver Non-Inverted Data Output
26 GND – Module Ground
27 ModPrsL LVTTL-O Module Present
28 IntL/RxLOSL LVTTL-O Interrupt. Optionally configurable as RxLOSL via the
management interface (SFF-8636).
29 VccTx – +3.3V Power Supply for Transmitter
30 Vcc1 – +3.3V Power Supply
31 LPMode/TxDis LVTTL-I Low Power Mode. Optionally configurable as TxDis via the
32 GND – Module Ground
33 Tx3p CML-I Transmitter Non-Inverted Data Input
34 Tx3n CML-I Transmitter Inverted Data Input
35 GND – Module Ground
36 Tx1p CML-I Transmitter Non-Inverted Data Input
37 Tx1n CML-I Transmitter Inverted Data Input
38 GND – Module Ground

 

Electrical Pad Layout of QSFP-DD
For detail mechanical information, please refer to the related document of QSFP-DD MSA.

Electrical Pad Layout of QSFP56
For detail mechanical information, please refer to the related document of SFF-8679.
PRODUCT CERTIFICATION

 

COMPATIBLE BRANDS
CONFIGURATION INFORMATION
The form can be filled in the actual website url.

 

400G QSFP-DD to 2×200G QSFP56 Active Direct Attach Copper Twinax Cable (ACC)最先出现在www.philisun.com。

]]> 400G QSFP-DD to QSFP-DD Active Direct Attach Copper Twinax Cable (ACC) https://www.philisun.com/products/400g-qsfp-dd-acc/ Sat, 09 May 2026 08:37:58 +0000 https://www.philisun.com/?post_type=product&p=9106 Compliant with
QSFP-DD MSA, SFF-8636 standard
Switch to Switch
Switch to GPU

400G QSFP-DD to QSFP-DD Active Direct Attach Copper Twinax Cable (ACC)最先出现在www.philisun.com。

]]>
SPECIFICATIONS
Cable End Connector AQSFP-DDCable End Connector BQSFP-DD
Jumper TypeDirect-AttachData Rate400G
Aggregate Bit Rate425GbpsLane Bit Rate53.125Gbps
Number of Channels8Single Channel Rate50G
Minimum Bend Radius5X Cable OD -Single, 10X Cable OD - RepeatedFactory BrandPHILISUN
Attenuation26AWG:10dB/8.5m maximum
28AWG:10dB/7m maximum
30AWG:8.4dB/5.5m maximum		Bit Error Rate≤10-12
ShieldBraid/FoilWire AWG26AWG/28AWG/30AWG
Cable TypeActive TwinaxCable OD30AWG: 14.0mm
28AWG:16.0mm
26AWG:18.0mm
Cable Colour/MaterialBlack PVC(OFNR)Cable Length Selection1-7meter
ProtocolsQSFP112 MSA/SFF-8636Application Scenarios400Gigabit Ethernet (400GbE)
Supply Voltage3.3VPower Dissipation<2.5W
Operating Temperature0 to 70℃ (32 to 158℉)Storage Temperature-40 to 85℃ (-40 to 185℉)

 

PRODUCT PRESENTATION

The PHILISUN 400G QSFP‑DD High‑Speed Active Twinax Cable delivers high‑quality connections without external power supply. Compliant with IEEE 802.3cd and SFF‑8636 MSA standards, it provides cost‑effective short‑reach interconnections for telecom central offices and data centers, supporting up to 400G LAN and SAN applications.

DAC SERIES PRODUCTS

 

PRODUCTION & TESTING EQUIPMENT

 

PERFORMANCE PARAMETER
Absolute Maximum Ratings
Parameter Unit Min. Typ. Max. Notes
Storage Temperature ℃ -45 – 80 –
Operating Relative Humidity % – – 85 –
Power Supply Not Damaged Voltage V -0.5 – 3.6 –

 

Recommended Operating Conditions
Parameter Unit Min. Typ. Max. Notes
Operating Case Temperature ℃ 0 – 70 –
Power Supply Working Voltage V 3.135 3.3 3.65 –
Bit Rate Gbps – 400 – –

 

Characteristics
All performance is defined over the recommended operating environment unless otherwise specified.
Item arameter Reference
SDD21 8dB<X<17. 16dB @13.28 GHz IEEE802.3cd, Clause 136.11.2
SDD11/22 ‘-16.5+2*sqrt(f)dB Max @0.05GHz-
4.1GHz
-10.66+14*1og(f/5.5) dB
Max@4.1GHz-19GHz		 –
SCD11/22 -22+(20/25.78) *f dB
Max@0.01GHz~12.89GHz
-15+(6/25.78) *f dB
Max@12.89GHz~19GHz		 IEEE802.3cd, Clause 136.11.4
SCD21-SDD21 ’-10dB Max @0.01GHz~12.89GHz
-27+(29/22) *f dB Max
@12.89GHz~15.7GHz
-6.3dB Max. @15.7GHz~19GHz		 IEEE802.3cd, Clause 136.11.5
SCC11/22 -2dB Max. @0.2GHz~19GHz IEEE802.3cd, Clause 136.11.6
COM 3 dB Min –

 

Pin Function Definitions
Pin No. Symbol Level / Logic Definition
1 GND – Module Ground
2 Tx2n CML-I Transmitter Inverted Data Input
3 Tx2p CML-I Transmitter Non-Inverted Data Input
4 GND – Module Ground
5 Tx4n CML-I Transmitter Inverted Data Input
6 Tx4p CML-I Transmitter Non-Inverted Data Input
7 GND – Module Ground
8 ModSelL LVTTL-I –
9 ResetL LVTTL-I Module Reset
10 VccRx – +3.3V Power Supply for Receiver
11 SCL LVTTL-I 2-Wire Serial Interface Clock
12 SDA LVTTL-I/O 2-Wire Serial Interface Data Line
13 GND – Module Ground
14 Rx3p CML-O Receiver Non-Inverted Data Output
15 Rx3n CML-O Receiver Inverted Data Output
16 GND – Module Ground
17 Rx1p CML-O Receiver Non-Inverted Data Output
18 Rx1n CML-O Receiver Inverted Data Output
19 GND – Module Ground
20 GND – Module Ground
21 Rx2n CML-O Receiver Inverted Data Output
22 Rx2p CML-O Receiver Non-Inverted Data Output
23 GND – Module Ground
24 Rx4n CML-O Receiver Inverted Data Output
25 Rx4p CML-O Receiver Non-Inverted Data Output
26 GND – Module Ground
27 ModPrsL LVTTL-O Module Present
28 IntL/RxLOSL LVTTL-O Interrupt. Optionally configurable as RxLOSL via the
management interface (SFF-8636).
29 VccTx – +3.3V Power Supply for Transmitter
30 Vcc1 – +3.3V Power Supply
31 LPMode/TxDis LVTTL-I Low Power Mode. Optionally configurable as TxDis via
the management interface (SFF-8636).
32 GND – Module Ground
33 Tx3p CML-I Transmitter Non-Inverted Data Input
34 Tx3n CML-I Transmitter Inverted Data Input
35 GND – Module Ground
36 Tx1p CML-I Transmitter Non-Inverted Data Input
37 Tx1n CML-I Transmitter Inverted Data Input
38 GND – Module Ground
39 GND – Module Ground
40 Tx6n CML-I Transmitter Inverted Data Input
41 Tx6p CML-I Transmitter Non-Inverted Data Input
42 GND – Module Ground
43 Tx8n CML-I Transmitter Inverted Data Input
44 Tx8p CML-I Transmitter Non-Inverted Data Input
45 GND – Module Ground
46 Reserved – For future use
47 VSI – Module Vendor Specific 1
48 VccRx1 – 3.3V Power Supply
49 VS2 – Module Vendor Specific 2
50 VS3 – Module Vendor Specific 3
51 GND – Module Ground
52 Rx7p CML-O Receiver Non-Inverted Data Output
53 Rx7n CML-O Receiver Inverted Data Output
54 GND – Module Ground
55 Rx5p CML-O Receiver Non-Inverted Data Output
56 Rx5n CML-O Receiver Inverted Data Output
57 GND – Module Ground
58 GND – Module Ground
59 Rx6n CML-O Receiver Inverted Data Output
60 Rx6p CML-O Receiver Non-Inverted Data Output
61 GND – Module Ground
62 Rx8n CML-O Receiver Inverted Data Output
63 Rx8p CML-O Receiver Non-Inverted Data Output
64 GND – Module Ground
65 NC – No Connect
66 Reserved – For future use
67 VccTx1 – 3.3V Power Supply
68 Vcc2 – 3.3V Power Supply
69 Reserved – For future use
70 GND – Module Ground
71 Tx7p CML-I Transmitter Non-Inverted Data Input
72 Tx7n CML-I Transmitter Inverted Data Input
73 GND – Module Ground
74 Tx5p CML-I Transmitter Non-Inverted Data Input
75 Tx5n CML-I Transmitter Inverted Data Input
76 GND – Module Ground

 

Lectrical Pad Layout
For detail mechanical information, please refer to the related document of QSFP-DD MSA.
PRODUCT CERTIFICATION

 

COMPATIBLE BRANDS
CONFIGURATION INFORMATION
The form can be filled in the actual website url.

 

400G QSFP-DD to QSFP-DD Active Direct Attach Copper Twinax Cable (ACC)最先出现在www.philisun.com。

]]> 200G QSFP56 to 2×100G QSFP56 Active Direct Attach Copper Twinax Cable (ACC) https://www.philisun.com/products/200g-qsfp56-2-100g-qsfp56-acc/ Sat, 09 May 2026 07:51:16 +0000 https://www.philisun.com/?post_type=product&p=9097 Compliant with
IEEE 802.3cd, SFF-8665, QSFP MSA, SFF-8679, SFF-8636, InfiniBand HDR standard
Switch to Switch
Switch to GPU

200G QSFP56 to 2×100G QSFP56 Active Direct Attach Copper Twinax Cable (ACC)最先出现在www.philisun.com。

]]>
SPECIFICATIONS
Cable End Connector AQSFP56Cable End Connector B2×QSFP56
Jumper TypeActive Optical Breakout CableData Rate200G
Aggregate Bit Rate200GbpsLane Bit Rate50Gbps
Number of Channels4Single Channel Rate50G
Minimum Bend Radius5X Cable OD -Single, 10X Cable OD - RepeatedFactory BrandPHILISUN
Attenuation26AWG:10dB/8.5m maximum
28AWG:10dB/7m maximum
30AWG:8.4dB/5.5m maximum		Bit Error Rate≤10-12
ShieldBraid/FoilWire AWG26AWG/28AWG/30AWG
Cable TypeActive TwinaxCable OD30AWG: 5.5mm
28AWG: 6.3mm
26AWG: 7.3mm
Cable Colour/MaterialBlack PVC(OFNR)Cable Length Selection1-7meter
ProtocolsSFF8665/QSFP MSA/IEEE 802.3cd/SFF-8679/SFF-8636/ InfiniBand HDRApplication Scenarios200Gigabit Ethernet (200GbE)
Supply Voltage3.3VPower Dissipation<1.5W
Operating Temperature0 to 70℃ (32 to 158℉)Storage Temperature-40 to 85℃ (-40 to 185℉)

 

PRODUCT PRESENTATION

The PHILISUN 200G QSFP56 to 2x100G QSFP56 Active High-Speed Direct Attach Copper Cable is a high-speed, cost-effective alternative to optical transceivers for 200Gb/s Ethernet applications. Fully compliant with SFF-8665 QSFP56 MSA standards, this breakout cable connects one 200G QSFP56 port to two 100G QSFP56 ports. It delivers economical short-reach interconnections for telecom central offices and data centers.

DAC SERIES PRODUCTS

 

PRODUCTION & TESTING EQUIPMENT

 

PERFORMANCE PARAMETER
Absolute Maximum Ratings
Parameter Symbol Min. Max. Unit Notes
Storage Temperature Range Ts -40 80 ºC –
Supply Voltage Vcc -0.5 3.6 V –
Operating Relative Humidity RH 85 % –

 

Recommended Operating Conditions
Parameter Symbol Min. Typica Max. Unit Notes
Operating Case Temperature TOPR 0 – 70 ºC –
Power Supply Voltage Vcc 3.135 3.3 3.465 V –
Data Rate DR – 200 – Gbps –

 

General Product Characteristics
All performance is defined over the recommended operating environment unless otherwise specified.
Item Parameter Reference
SDD21 8dB <X < 17. 16dB @ 13.28 GHz IEEE802.3cd, Clause 136.11.2
SDD11/22 – 16.5+2*sqrt(f)dB Max. @0.05GHz-4. 1GHz
– 10.66+ 14*1og(f/5.5) dB Max.@4. 1GHz- 19GHz		 –
SDD11/22 -22+(20/25.78) *f dB Max.@0.01GHz~ 12.89GHz
– 15+(6/25.78) *f dB Max.@ 12.89GHz~ 19GHz		 IEEE802.3cd, Clause 136.11.4
SCD21-SDD21 – 10dB Max. @0.01GHz~ 12.89GHz
-27+(29/22) *f dB Max. @ 12.89GHz~ 15.7GHz
-6.3dB Max. @ 15.7GHz~ 19GHz		 IEEE802.3cd, Clause 136.11.5
SCC11/22 -2dB Max. @0.2GHz~ 19GHz IEEE802.3cd, Clause 136.11.6
ICN 3 ≤ IL≤ 7.65: 5 mV Max.
7.65 ≤ IL ≤ 26:  12.75 – 0.49 *f mV Max.
IL is the value @13.28GHz, f is in GHz		 –
COM 3dB Min. –
NEXT -40dB Max. –

 

Pin Descriptions

 

Pin Logic Symbol Description
1 – GND Module Ground
2 CML-I Tx2n Transmitter Inverted Data Input
3 CML-I Tx2p Transmitter Non-inverted Data Input
4 – GND Module Ground
5 CML-I Tx4n Transmitter Inverted Data Input
6 CML-I Tx4p Transmitter Non-Inverted Data Input
7 – GND Module Ground
8 LVTTL-I ModSelL Module Select
9 LVTTL-I ResetL Module Reset
10 – Vcc Rx +3.3V Power Supply for Receiver
11 LVTTL-I SCL 2-wire Serial Interface Clock
12 LVTTL-I/O SDA 2-wire Serial Interface Data Line
13 – GND Module Ground
14 CML-O Rx3p Receiver Non-Inverted Data Output
15 CML-O Rx3n Receiver Inverted Data Output
16 – GND Module Ground
17 CML-O Rx1p Receiver Non-Inverted Data Output
18 CML-O Rx1n Receiver Inverted Data Output
19 – GND Module Ground
20 – GND Module Ground
21 CML-O Rx2n Receiver Inverted Data Output
22 CML-O Rx2p Receiver Non-Inverted Data Output
23 – GND Module Ground
24 CML-O Rx4n Receiver Inverted Data Output
25 CML-O Rx4p Receiver Non-Inverted Data Output
26 – GND Module Ground
27 LVTTL-O ModPrsL Module Ground
28 LVTTL-O IntL/RxLOSL Interrupt. Optionally Configurable As Rxlosl Via The
Management Interface (sff-8636)
29 – VccTx +3.3v Power Supply For Transmitter
30 – Vcc1 +3.3v Power Supply
31 LVTTL-I LPMode/Tx Dis Low Power Mode. Optionally Configurable as TxDis via the
Management Interface (SFF-8636).
32 – GND Module Ground
33 CML-I Tx3p Transmitter Non-Inverted Data Input
34 CML-I Tx3n Transmitter Inverted Data Input
35 – GND Module Ground
36 CML-I Tx1p Transmitter Non-Inverted Data Input
37 CML-I Tx1n Transmitter Inverted Data Input
38 – GND Module Ground

 

PRODUCT CERTIFICATION

 

COMPATIBLE BRANDS
CONFIGURATION INFORMATION
The form can be filled in the actual website url.

 

200G QSFP56 to 2×100G QSFP56 Active Direct Attach Copper Twinax Cable (ACC)最先出现在www.philisun.com。

]]> 100G QSFP28 to 4×25G SFP28 Active Direct Attach Copper Twinax Cable (ACC) https://www.philisun.com/products/100g-qsfp28-4-25g-sfp28-acc/ Sat, 09 May 2026 06:04:51 +0000 https://www.philisun.com/?post_type=product&p=9087 Compliant with
QSFP28 MSA, SFP28 MSA, SFF-8665, SFF-8679, SFF-8472, SFF-8402 standard
Switch to Switch
Switch to GPU

100G QSFP28 to 4×25G SFP28 Active Direct Attach Copper Twinax Cable (ACC)最先出现在www.philisun.com。

]]>
SPECIFICATIONS
Cable End Connector AQSFP28Cable End Connector B4×SFP28
Jumper TypeActive Optical Breakout CableData Rate100G
Aggregate Bit Rate100GbpsLane Bit Rate25Gbps
Number of Channels4Single Channel Rate10G
Minimum Bend Radius5X Cable OD -Single, 10X Cable OD - RepeatedFactory BrandPHILISUN
Attenuation26AWG:10dB/8.5m maximum
28AWG:10dB/7m maximum
30AWG:8.4dB/5.5m maximum		Bit Error Rate≤10-12
ShieldBraid/FoilWire AWG26AWG/28AWG/30AWG
Cable TypeActive TwinaxCable OD30AWG: 6.6mm
28AWG: 8.0mm
26AWG: 8.9mm
Cable Colour/MaterialBlack PVC(OFNR)Cable Length Selection1-9meter
ProtocolsSFF-8665/SFF-8402/ SFP28 MSA/QSFP28 MSA/SFF-8679/SFF-8472Application Scenarios100Gigabit Ethernet (100GbE)
Supply Voltage3.3VPower Dissipation<1.8W
Operating Temperature0 to 70℃ (32 to 158℉)Storage Temperature-40 to 85℃ (-40 to 185℉)

 

PRODUCT PRESENTATION

The PHILISUN 100G SFP28 to 4x 25G SFP28 active twinax cable is designed for 100G to 4x 25G Ethernet breakout applications.It complies with SFF-8679, SFF-8472, SFF-8402, SFF-8665, hot-pluggable QSFP28 MSA and SFP28 MSA standards.It connects one 100G QSFP28 port to four 25G SFP28 ports for short‑reach interconnections.Features low latency, low power consumption and high reliability, delivering a cost-effective connectivity solution.Ideal for data centers, high-performance computing (HPC), and intra-rack or adjacent-rack connections for switches, routers, servers and storage systems.

 

DAC SERIES PRODUCTS

 

PRODUCTION & TESTING EQUIPMENT

 

PERFORMANCE PARAMETER
Absolute Maximum Ratings
Parameter Unit Min. Typical Max. Notes
Storage Temperature ℃ -40 – 85 –
Operating Case Temperature ℃ 0 – 70 –
Operating Relative Humidity % – – 85 –
Power Supply Working Voltage V 3. 135 3 3.465 –
Bit Rate Gbps – 100.0 – –

 

Electrical Characteristics
All performance is specified at whole working temperature and conditions
Item Parameter Notes
Physical Length 5 m, 6 m, 7 m, 8 m, 9 m –
– Cable Colour Black –
Electrical Resistance 2 ohm Max. –
– Insulation Resistance 10M ohm Min. –
SI Performance SDD21 -22.48d B Min. @ 12.89GHz
– SDD11/SDD22 – 16.5+2*sqrt(f)dB Max. @0.05GHz-4.1GHz
– – – 10.66+ 14*1og(f/5.5)dB Max. @4. 1GHz- 19GHz
Item Parameter Notes
SI Performance SCD22 -22+(20/25.78)*f dB Max. @0.01GHz~ 12.89GHz
– – 15+(6/25.78)*f dB Max. @ 12.89GHz~ 19GHz
SCC11 -2d B Max. –
SCD21-SDD21 – 10d B Max. @0.01GHz~ 12.89GHz
– -27+(29/22)*f dB Max. @ 12.89GHz~ 15.7GHz
– -6.3d B Max. @ 15.7GHz~ 19GHz
MDNEXT -30d B Max. –
COM 3d B Min. –

 

QSFP28 Pin Description
For detail mechanical information, please refer to the related document of SFF-8679.

 

Pad Logic Symbol Description Plug
Sequence
1 – GND Ground 1
2 CML-I Tx2n Transmitter Inverted Data Input 3
3 CML-I Tx2p Transmitter Non-Inverted Data Input 3
4 – GND Ground 1
5 CML-I Tx4n Transmitter Inverted Data Input 3
6 CML-I Tx4p Transmitter Non-Inverted Data Input 3
7 – GND Ground 1
8 LVITL-I ModSeIL Module Select 3
9 LVITL-I Resetl Module Reset 3
10 – VCCRx +3.3V Power Supply Receiver 2
1 1 LVCM0S-I/O SCL Two-Wire Interface Clock 3
12 LVCM0S-I/O SDA Two-Wire Interface Data 3
13 – GND Ground 1
14 CML-O Rx3p Receiver Non-Inverted Data Output 3
15 CML-O Rx3n Receiver Inverted Data Output 3
16 – GND Ground 1
17 CML-O Rx1p Receiver Non-Inverted Data Output 3
18 CML-O Rx1n Receiver Inverted Data Output 3
19 – GND Ground 1
20 – GND Ground 1
21 CML-O Rx2n Receiver Inverted Data Output 3
22 CML-O Rx2p Receiver Non-Inverted Data Output 3
23 – GND Ground 1
24 CML-O Rx4n Receiver Inverted Data Output 3
25 CML-O Rx4p Receiver Non-Inverted Data Output 3
26 – GND Ground 1
27 LVTTL-O ModPrsL Module Present 3
28 LVTTL-O IntL/ RxL0SL I nterrupt. Optionaily configurable as RxL0SL
via the Management Interface (SFF-8636).		 3
29 – VCCTx +3.3V Power Supply Transmitter 2
30 – VCC1 +3.3V Power Supply 2
31 LVTTL-I LPMode/Tx Dis Low Power Mode. Optionally Configurable as
Tx Dis via the Management Interface (SFF-8636).		 3
32 – GND Ground 1
33 CML-I Tx3p Transmitter Non-Inverted Data Input 3
34 CML-I Tx3n Transmitter Inverted Data Input 3
35 – GND Ground 1
36 CML-I Tx1p Transmitter Non-Inverted Data Input 3
37 CML-I Tx1n Transmitter Inverted Data Input 3
38 – GND Ground 1

 

SFP28 Pin Description

 

Pin No. Symbol Level/Logic Description
1 VEET – Module Transmitter Ground
2 TX_FAULT LVTTL-O Module Transmitter Fault Indication
3 TX_DIS LVTTL-I Transmitter Disable; Active High Disable Transmitter Output
4 SDA LVTTL-I 2-Wire Serial Interface Data Line
5 SCL LVTTL-I/O 2-Wire Serial Interface Clock
6 MOD_ABS LVTTL-O Module A bsent. Connected to Ground in the Module
7 RS0 – Rate Select 0. Optionally Controls SFP28 Module Receiver
8 RX_LOS LVTTL-O Loss of Receiver Signal Indication
9 RS1 – Rate Select  1, Optionally Controls SFP28 Module Transmitter
10 VEER – Module Receiver Ground
11 VEER – Module Receiver Ground
12 RD- CML-O Receiver Inverted Data Output
13 RD+ CML-O Receiver Non-Inverted Data Output
14 VEER – Module Receiver Ground
15 VCCR – Module Receiver 3.3V Supply
16 VCCT – Module Transmitter 3.3V Supply
17 VEET – Module Transmitter Ground
18 TD+ CML-I Transmitter Non-Inverted Data Input
19 TD- CML-I Transmitter Inverted Data Input
20 VEET – Module Transmitter Ground

 

PRODUCT CERTIFICATION

 

COMPATIBLE BRANDS
CONFIGURATION INFORMATION
The form can be filled in the actual website url.

 

100G QSFP28 to 4×25G SFP28 Active Direct Attach Copper Twinax Cable (ACC)最先出现在www.philisun.com。

]]> 100G QSFP28 to 2×50G QSFP28 Active Direct Attach Copper Twinax Cable (ACC) https://www.philisun.com/products/100g-qsfp28-2-50g-qsfp28-acc/ Sat, 09 May 2026 05:16:52 +0000 https://www.philisun.com/?post_type=product&p=9078 Compliant with
SFF-8665, QSFP28 MSA, SFF-8636, SFF-8679 standard
Switch to Switch
Switch to GPU

100G QSFP28 to 2×50G QSFP28 Active Direct Attach Copper Twinax Cable (ACC)最先出现在www.philisun.com。

]]>
SPECIFICATIONS
Cable End Connector AQSFP28Cable End Connector B2×QSFP28
Jumper TypeActive Optical Breakout CableData Rate100G
Aggregate Bit Rate100GbpsLane Bit Rate25Gbps
Number of Channels4Single Channel Rate10G
Minimum Bend Radius5X Cable OD -Single, 10X Cable OD - RepeatedFactory BrandPHILISUN
Attenuation26AWG:10dB/8.5m maximum
28AWG:10dB/7m maximum
30AWG:8.4dB/5.5m maximum		Bit Error Rate≤10-12
ShieldBraid/FoilWire AWG26AWG/28AWG/30AWG
Cable TypeActive TwinaxCable OD30AWG: 5.5mm
28AWG: 9.2mm
26AWG:7.3mm
Cable Colour/MaterialBlack PVC(OFNR)Cable Length Selection1-9meter
ProtocolsSFF-8665/SFF-8636/SFF-8679/QSFP28 MSAApplication Scenarios100Gigabit Ethernet (100GbE)
Supply Voltage3.3VPower Dissipation<1.5W
Operating Temperature0 to 70℃ (32 to 158℉)Storage Temperature-40 to 85℃ (-40 to 185℉)

 

PRODUCT PRESENTATION

The PHILISUN QSFP28 to 2×50G QSFP28 Ethernet active direct attach copper breakout cable features an active design for extended reach and a thinner cable profile. It complies with SFF‑8665, QSFP28 MSA, SFF‑8636, and SFF‑8679 standards, and supports hot‑plugging per QSFP28 MSA. Verified on Cisco and Dell target switches, it delivers outstanding performance, quality, and reliability. Ideal for short‑reach connections, it provides a cost‑effective interconnect solution for data centers and high‑performance computing (HPC) environments, linking 100G QSFP28 and 50G QSFP28 ports across switches, routers, servers, and storage in cross‑rack deployments.

DAC SERIES PRODUCTS

 

PRODUCTION & TESTING EQUIPMENT

 

PERFORMANCE PARAMETER
Absolute Maximum Ratings
Parameter Symbol Min. Typlcal Max. Unit
Storage Temperature Range Ts -40 – 85 ℃
Operating Relative Humidity RH – – 85 %
Bit Rate BR – 106.25 – Gbps
Operating Case Temperature TOPR 0 70 70 ℃
Power Supply Voltage VCC 3.135 3.3 3.456 V

 

Characteristics
Item Parameter
Physical Length Up to 9m
– Cable Color Black
Electrical Ressistance 2 ohm Max
– Insulation  Resistance 10M ohm Min
SI Performance SDD21 -22.48dB Min. @12.89GHz no suck-out < 30GHZ
– SDD11/SDD22 -16.5+2*sqrt(f)dB Max @0.05GHz-4.1GHz
-10.66+14* 1og(f/5.5) dB Max@4.1GHz-19GHz
– SCD22 -22+(20/25.78)*fdB Max@0.01GHz~12.89GHz
-15+(6/25.78)*fdB Max@12.89GHz~19GHz
– SCC11 -2dB Max
– SCD21-SDD21 -10dB Max @0.01GHz~12.89GHz
-27+(29/22)*fdB Max @12.89GHz~15.7GHz
-6.3dB Max @15.7GHz~19GHz
– NEXT -30 dB Max
– COM 3 dB Min

 

Pin Function Definitions
Pin No. Logic Symbol Description Plug Sequence
1 – GND Ground 1
2 GML-I Tx2n  Transmitter Inverted Data Input 3
3 GML-I  Tx2p Transmitter Non-Inverted Data Input 3
4 – GND Ground 1
5 GML-I Tx4n Transmitter Inverted Data Input 3
6 GML-I Tx4p Transmitter Non-Inverted Data Input 3
7 – GND Ground 1
8 LVTTL-I ModSelL Module Select 3
9 LVTTL-I ResetL Module Reset 3
10 – VccRx +3.3V Power Supply Receiver 2
11 LVCMOS-I/O SCL Two-wire interface clock 3
12 LVCMOS-I/O SDA Two-wire interface data 3
13 – GND Ground 1
14 CML-O Rx3p Receiver Non-Inverted Data Output 3
15 CML-O Rx3n Receiver Inverted Data Output 3
16 – GND Ground 1
17 CML-O Rx1p Receiver Non-Inverted Data Output 3
18 CML-O Rx1n Receiver Inverted Data Output 3
19 – GND Ground 1
20 – GND Ground 1
21 CML-O Rx2n Receiver Inverted Data Output 3
22 CML-O Rx2p Receiver Non-Inverted Data Output 3
23 – GND Ground 1
24 CML-O Rx4n Receiver Inverted Data Output 3
25 CML-O Rx4p Receiver Non-Inverted Data Output 3
26 – GND Ground 1
27 LVTTL-O ModPrsL Module Predent 3
28 LVTTL-O IntL/RxLOSL Interrupt. Optionally configurable as RxLOSL via
the management interface (SFF-8636)		 3
29 – VxxTX +3.3V Power supply transmitter 2
30 – Vxxl +3.3V Power supply 2
31 LVTTL-I LPMode/TxDis Low Power Mode. Optionally configurable as TxDis
via the management interface (SFF-8636)		 3
32 – GND Ground 1
33 CML-I Tx3p Transmitter Non-Inverted Data Input 3
34 CML-I Tx3n Tramsmitter Inverted Data Input 3
35 – GND Ground 1
36 CML-I Tx1p Transmitter Non-Inverted Data Input 3
37 CML-I Tx1n Tramsmitter Inverted Data Input 3
38 – GND Ground 1

 

Transceiver Electrical Pad Layout

 

PRODUCT CERTIFICATION

 

COMPATIBLE BRANDS
CONFIGURATION INFORMATION
The form can be filled in the actual website url.

 

100G QSFP28 to 2×50G QSFP28 Active Direct Attach Copper Twinax Cable (ACC)最先出现在www.philisun.com。

]]> 40G QSFP to QSFP Active Direct Attach Copper Twinax Cable (ACC) https://www.philisun.com/products/40g-qsfp-acc/ Sat, 09 May 2026 03:26:19 +0000 https://www.philisun.com/?post_type=product&p=9069 Compliant with
40G InfiniBand 8x DDR，4x QDR，10G/40Gigabit Ethernet standard
Switch to Switch
Switch to GPU

40G QSFP to QSFP Active Direct Attach Copper Twinax Cable (ACC)最先出现在www.philisun.com。

]]>
SPECIFICATIONS
Cable End Connector AQSFP+Cable End Connector BQSFP+
Jumper TypeDirect-AttachData Rate40G
Aggregate Bit Rate41.2GbpsLane Bit Rate10.3Gbps
Number of Channels4Single Channel Rate10G
Minimum Bend Radius5X Cable OD -Single, 10X Cable OD - RepeatedFactory BrandPHILISUN
Attenuation24AWG:10dB/10m maximum
26AWG:10dB/8.5m maximum
28AWG:10dB/7m maximum
30AWG:8.4dB/5.5m maximum		Bit Error Rate≤10-12
ShieldBraid/FoilWire AWG24AWG/26AWG/28AWG/30AWG
Cable TypeActive TwinaxCable OD30AWG: 4.2mm
28AWG: 4.7mm
26AWG: 5.2mm
24AWG: 6.0mm
Cable Colour/MaterialBlack PVC(OFNR)Cable Length Selection1-10 meter
ProtocolsSFF-8436/QSFP MSAApplication Scenarios10/40Gigabit Ethernet (10/40GbE)
Supply Voltage3.3VPower Dissipation<2W
Operating Temperature0 to 70℃ (32 to 158℉)Storage Temperature-40 to 85℃ (-40 to 185℉)

 

PRODUCT PRESENTATION
The PHILISUN 40G QSFP+ active copper cable is designed for 40GBASE Ethernet applications, providing a direct QSFP+ to QSFP+ connection solution. It complies with IEEE 802.3ba and QSFP MSA standards. Easy to install, high-speed and cost-effective, this cable is ideal for short‑reach connections within or between adjacent racks in data centers.

 

DAC SERIES PRODUCTS

 

PRODUCTION & TESTING EQUIPMENT

 

PERFORMANCE PARAMETER
Absolute Maximum Ratings
Parameter Symbol Min Typ. Max Unit
Operating Case Temperature Tc 0 – 70 ℃
Relative Humidity RH – – 85 %
Supply Voltage Vcc 3.135 3.3 3.465 v
Total Power Consumption PD – – 2 w
Data Rate Per Lane – 1 – 10.3 Gb/s
Note:
1. Damage may occur if the transceiver is subjected to conditions beyond the limits.

 

Performance Specification
Electrical
Min. Dielectric Withstand Voltage 300 VDC
Insulation Resistance 1000 Mohms
Current Rating 0.5 Amp Min/Signal Contact
General
Operating Temperature 0 to 70 ℃
Flammability Rating(Plastics) UL 94
Green Features RoHS, Lead-Free
Shield Braid/Foil
Marking Mfg Name, Part#, Date Code
Plug
Backshell Material Nickel-Plated Zinc Diecast
Contact Material PCB with Gold-Plated Pads
Plastic Material PA66
Latch Positive Latching w/Pull Tab
Insertion Force 40N Max
Withdrawal Force 30N Max
Retention Force 90N Max
Durability 50 Cycles
Cable
Conductor Solid
Wire Gauge AWG30, AWG28, AWG26, AWG24
Impedance 100± 5 ohms
Construction Twinaxial
Cable OD AWG 30 :4.2mm
AWG 28 :4.7mm
AWG 26:5.2mm
AWG 24: 6.0mm
Jacket Type PVC
Bend Radius 5X Cable OD -Single
10X Cable OD -Repeated

 

Electrical Characteristics
Test Type Test Item 24AWG 26AWG 28AWG 30AWG
Electrical
Character
istics		 Differential
impedance		 100±5Ω @ TDR 100±5Ω 100±5Ω 100±5Ω  @ TDR
– Mutual capacitance 14pF/ft nominal 14pF/ft nominal 14pF/ft nominal 14pF/ft nominal
– Time delay 1.31ns/ft nominal,
(4.3ns/m) nominal		 1.35ns/ft nominal 1.35ns/ft nominal 1.35ns/ft nominal,
(4.3ns/m) nominal
– Time delay
skew
(within
pairs)		 80ps/10m maximum 120ps/8.5m maximum 120ps/7m maximum 50ps/5.5m maximum
– Time delay
skew
(between
pairs)		 350ps/ 10m maximum 500ps/8.5m maximum 500ps/7m maximum 350ps/5.5m maximum
– Attenuation 10dB/ 10m maximum
@1.25Ghz		 10dB/8.5m maximum
@1.25Ghz		 10dB/7mmaximum
@1.25Ghz		 8.4dB/5.5m maximum
@ 1.25Ghz
– Conductor
DC
Resistance		 0.026Ω /ft maximum
@20 ℃		 0.04Ω /ft maximum
@ 20 ℃		 0.06Ω /ft maximum
@20 ℃		 0.01Ω /ft maximum
@20 ℃
Physical
Characteris
tics		 Conductors
(two pair)		 24AWG Solid, Silver
plated copper		 26AWG Solid, Silver
plated copper		 28AWG Solid, Silver
plated copper		 30AWG Solid, Silver
plated copper
– Insulation Foam polyolefin Foam polyolefin Foam polyolefin Foam polyolefin
– Pair drain
wire		 26AWG Solid, Silver
plated copper		 28AWG Solid, Silver
plated copper		 30AWG Solid, Silver
plated copper		 30AWG Solid, Silver
plated copper
– Overall
cable
shield		 Aluminum/polyester
tape, 125% coverage,
Tin plated copper
braid,38AWG, 85%
coverage		 Aluminum/polyester
tape, 125% coverage,
Tin plated copper
braid,38AWG, 85%
coverage		 Aluminum/polyester
tape, 125% coverage,
Tin plated copper
braid,38AWG, 85%
coverage		 Aluminum/polyester
tape, 125% coverage,
Tin plated copper
braid,38AWG, 85%
coverage
– Outer
diameter		 6.0mm 5.2mm 4.7mm 4.2mm

 

Pin Designation

 

Pin Logic Symbol Name/Description Notes
1 – GND Ground 1
2 CML-I Tx2n Transmitter Inverted Data Input –
3 CML-I Tx2p Transmitter Non-inverted Data Input –
4 – GND Ground 1
5 CML-I Tx4n Transmitter Inverted Data Input –
6 CML-I Tx4p Transmitter Non-inverted Data Input –
7 – GND Ground 1
8 LVTTL-I ModSelL Module Select –
9 LVTTL-I ResetL Module Reset –
10 – Vcc Rx +3.3V Power Supply Receiver –
11 LVCMOS-I/O SCL 2-Wire Serial Interface Clock 2
12 LVCMOS-I/O SDA 2-Wire Serial Interface Data 2
13 – GND Ground 1
14 CML-O Rx3p Receiver Non-Inverted Data Output –
15 CML-O Rx3n Receiver Inverted Data Output –
16 – GND Ground 1
17 CML-O Rx1p Receiver Non-Inverted Data Output –
18 CML-O Rx1n Receiver Inverted Data Output –
19 – GND Ground 1
20 – GND Ground 1
21 CML-O Rx2n Receiver Inverted Data Output –
22 CML-O Rx2p Receiver Non-Inverted Data Output –
21 CML-O Rx2n Receiver Inverted Data Output –
22 CML-O Rx2p Receiver Non-Inverted Data Output –
23 – GND Ground 1
24 CML-O Rx4n Receiver Inverted Data Output –
25 CML-O Rx4p Receiver Non-Inverted Data Output –
26 – GND Ground 1
27 LVTTL-O ModPrsL Module Present 2
28 LVTTL-O IntL Interrupt 2
29 – Vcc Tx +3.3V Power Supply Transmitter –
30 – Vcc1 +3.3V Power Supply –
31 LVTTL-I LPMode Low Power Mode –
32 – GND Ground 1
33 CML-I Tx3p Transmitter Non-inverted Data Input –
34 CML-I Tx3n Transmitter Inverted Data Input –
35 – GND Ground 1
36 CML-I Tx1p Transmitter Non-inverted Data Input –
37 CML-I Tx1n Transmitter Inverted Data Input –
38 – GND Ground 1
Notes:
1. Module ground pins GND are isolated from the module case and chassis ground within the module.
2. Shall be pulled up with 4.7K-10Kohms to a voltage between 3. 14V and 3.47V on the host board.

 

PRODUCT CERTIFICATION

 

COMPATIBLE BRANDS
CONFIGURATION INFORMATION
The form can be filled in the actual website url.

 

40G QSFP to QSFP Active Direct Attach Copper Twinax Cable (ACC)最先出现在www.philisun.com。

]]> 25G SFP28 to SFP28 Active Direct Attach Copper Twinax Cable (ACC) https://www.philisun.com/products/25g-sfp28-acc/ Sat, 09 May 2026 02:49:21 +0000 https://www.philisun.com/?post_type=product&p=9059 Compliant with IEEE 802.3, SFP28 MSA, SFF-8402 standard
Switch to Switch
Switch to GPU

25G SFP28 to SFP28 Active Direct Attach Copper Twinax Cable (ACC)最先出现在www.philisun.com。

]]>
SPECIFICATIONS
Cable End Connector ASFP28Cable End Connector BSFP28
Jumper TypeDirect-AttachData Rate25G
Aggregate Bit Rate25.78125GbpsLane Bit Rate25.78125Gbps
Number of Channels1Single Channel Rate25G
Minimum Bend Radius5X Cable OD -Single, 10X Cable OD - RepeatedFactory BrandPHILISUN
Attenuation26AWG:10dB/8.5m maximum
28AWG:10dB/7m maximum
30AWG:8.4dB/5.5m maximum		Bit Error Rate≤10-12
ShieldBraid/FoilWire AWG26AWG/28AWG/30AWG
Cable TypeActive TwinaxCable OD30AWG: 4.5mm
28AWG: 4.8mm
26AWG: 5.6mm
Cable Colour/MaterialBlack PVC(OFNR)Cable Length Selection1-9 meter
ProtocolsSFF-8402/IEEE802.3/SFF 8472/SFP28 MSAApplication Scenarios25 Gigabit Ethernet (25GbE)
Supply Voltage3.3VPower Dissipation<0.5W
Operating Temperature0 to 70℃ (32 to 158℉)Storage Temperature-40 to 85℃ (-40 to 185℉)

 

PRODUCT PRESENTATION
The PHILISUN 25G SFP28 to SFP28 Active Twinax Cable is designed for 25G Ethernet applications. It complies with IEEE 802.3 and SFP28 MSA standards. Each SFP28 connector integrates an EEPROM that stores product information readable by the host system.
These cables are ideal for very short‑reach links, offering a cost‑effective solution for 25G connections within and between adjacent racks, connecting to 25G SFP28 ports on switches and routers.

 

DAC SERIES PRODUCTS

 

PRODUCTION & TESTING EQUIPMENT

 

PERFORMANCE PARAMETER
Absolute Maximum Ratings
Parameter Unit Min. Typical Max. Notes
Storage Temperature ℃ -40 – 85 –
Operating Relative Humidity % – – 85 –
Power Supply Working Voltage V -0.5 – 3.63 –

 

Recommended Operating Conditions
Parameter Unit Min. Typical Max. Notes
Operating Case Temperature ℃ 0 – 70 –
Power Supply Working Voltage V 3.135 3.135 3.135 –
Bit Rate Gbps – 25.78125 – –

 

Electrical Characteristics
Parameter Unit Min. Typical Max. Notes
Differential Impedance Ω 90 100 110 1
Differential Insertion Loss SDD21 –   -22.48d B Min. @ 12.89GHz –
Intra- Pair Skew ps/m – – 15 2
NEXT dB – – -35 –
COM dB 4 – – –
Dielectric Withstand Voltage VDC 300 – – 3
Insulation Resistance MΩ 10 – – 4
Low Level Contact Resistance Milliohms – – 70 5
Note:
1. Test condition: Rise time of 25ps (20 % – 80 %), cable termination.
2. 10MHz≤f ≤ 19GHz.
3. EIA-364-20: Apply a voltage of 300 VDC for  1 minutebetween adjacent terminals, and between adjacent terminals and ground.
4. EIA364-21: AC 300V  1 minute.
5. EIA-364-23: Apply a maximum voltage of 20mV, and a current of 100 mA.

 

Performance Specification
All performance is defined over the recommended operating environment unless otherwise specified.
1. Cable
Parameter Typical
Wire Gauge AWG30/AWG28/AWG26
Impedance 100±5Ω
Construction Twin-Axial
Jacket Type PVC
  Bend Radius 5X Cable OD -Single,  10X Cable OD – Repeated
2. Plug
Parameter Typical
Backshell Material Nickel- Plated Zinc Diecast
Contact Material PCB with Gold- Plated Pads
Latch Positive Latching w/Pull Tab
Insertion Force 18N Max.
Withdrawal Force 12.5N Max.
Retention Force 90N Min.
Durability 50 Cycles Min.

 

PIN Function Definitions

 

Transceiver Pin Descriptions
Pin No. Symbol Level/ Logic Description
1 VeeT – Module Transmitter Ground
2 Tx_Fault LVTTL-O Module Transmitter Fault Indication
3 Tx_DIS LVTTL-I Transmitter Disable, Active High Disable Transmitter Output
4 SDA LVTTL-I 2-Wire Serial Interface Data Line
5 SCL LVTTL-I/O 2-Wire Serial Interface Clock
6 MOD_ABS LVTTL-O Module Absent, Connected to Ground in The Module
7 RS0 – Rate Select0,Optionally Controls SFP28 Module Receiver
8 RX_LOS LVTTL-O Loss of Receiver Signal Indication
9 RS1 – Rate Select 1, Optionally Controls SFP28 Module Transmitter
10 VeeR – Module Receiver Ground
11 VeeR – Module Receiver Ground
12 RD- CML-O Receiver Inverted Data Output
13 RD+ CML-O Receiver Non-Inverted Data Output
14 VeeR – Module Receiver Ground
15 VccR – Module Receiver 3.3V Supply
16 VccT – Module Transmitter 3.3V Supply
17 VeeT – Module Transmitter Ground
18 TD+ CML-I Transmitter Non-Inverted Data Input
19 TD- CML-I Transmitter Inverted Data Input
20 VeeT – Module Transmitter Ground

 

Recommended Wiring Diagram

 

PRODUCT CERTIFICATION

 

COMPATIBLE BRANDS
CONFIGURATION INFORMATION
The form can be filled in the actual website url.

 

25G SFP28 to SFP28 Active Direct Attach Copper Twinax Cable (ACC)最先出现在www.philisun.com。

]]> 10G SFP+ to SFP+ Active Direct Attach Copper Twinax Cable (ACC) https://www.philisun.com/products/sfp-10g-acc/ Fri, 08 May 2026 10:04:21 +0000 https://www.philisun.com/?post_type=product&p=9049 Compliant with IEEE 802.3、SFF-8431、QSFP28 MSA standard
Switch to Switch
Switch to GPU

10G SFP+ to SFP+ Active Direct Attach Copper Twinax Cable (ACC)最先出现在www.philisun.com。

]]>
SPECIFICATIONS
Cable End Connector ASFP+Cable End Connector BSFP+
Jumper TypeDirect-AttachData Rate10G
Aggregate Bit Rate10.5GbpsLane Bit Rate10Gbps
Number of Channels1Single Channel Rate10G
Minimum Bend Radius5X Cable OD -Single, 10X Cable OD - RepeatedFactory BrandPHILISUN
Attenuation24AWG:10dB/10m maximum
26AWG:10dB/8.5m maximum
28AWG:10dB/7m maximum
30AWG:8.4dB/5.5m maximum		Bit Error Rate≤10-12
ShieldBraid/FoilWire AWG24AWG/26AWG/28AWG/30AWG
Cable TypeActive TwinaxCable OD30AWG: 4.2mm
28AWG: 4.7mm
26AWG: 5.2mm
24AWG: 6.0mm
Cable Colour/MaterialBlack PVC(OFNR)Cable Length Selection1-10 meter
ProtocolsSFF-8472/SFF-8432/SFF-8431/SFP+ MSA
1x InfiniBand QDR, DDR, SDR
10 Gigabit Ethernet 		Application Scenarios10 Gigabit Ethernet (10GbE)
Supply Voltage3.3VPower Dissipation<0.5W
Operating Temperature0 to 70℃ (32 to 158℉)Storage Temperature-40 to 85℃ (-40 to 185℉)

 

PRODUCT PRESENTATION
The PHILISUN 10G SFP+ to SFP+ Active Copper Cable (ACC) is engineered to maintain low-latency aggregation while extending the reach of 10G copper connections beyond passive limits. Compliant with SFF-8431 and IEEE 802.3ae standards, this cable utilizes active twinax technology and integrated circuitry to ensure high signal integrity for reliable data transmission up to 10.3125 Gbps NRZ. Making it a critical, cost-effective alternative to optical solutions for extended distances, it is deployed in demanding enterprise environments for switch-to-switch stacking and high-performance server connectivity, supporting efficient, scalable 10G backbone architecture.

 

DAC SERIES PRODUCTS

 

PRODUCTION & TESTING EQUIPMENT

 

PERFORMANCE PARAMETER
Absolute Maximum Ratings
Parameter Symbol Min Typ. Max Unit
Standard Temperature Tc 0 25 70 °C
Storage Temperature Ts -5 – 85 °C
Relative Humidity RH 5 – 95 %
Supply Voltage – 3. 15 3.3 3.45 V
Data Rate Per Lane – 1 10.5 – Gbp/s

 

Performance Specification
Electrical
Min. Dielectric Withstand Voltage 300 VDC
Insulation Resistance 1000 Mohms
Current Rating 0.5 Amp Min/Signal Contact
General
Operating Temperature 0 to 70  °C
Flammability Rating UL 94 V-0
Green Features RoHS, Lead- Free
Shield Braid/Foil
Marking Mfg Name, Part#, Date Code
Plug
Backshell Material Nickel- Plated Zinc Diecast
Contact Material PCB with Gold- Plated Pads
Latch Positive Latching w/Pull
Insertion Force 30N Max
Withdrawal Force 20N Max
Retention Force 90N Max
Durability 50 Cycles Min
Cable
Conductor Solid
Wire Gauge AWG30, AWG28, AWG26, AWG24
Impedance 100± 5 ohms
Cable OD AWG 30 :4.2 mm
AWG 28 :4.7 mm
AWG 26:5.2 mm
AWG 24: 6.0 mm
Jacket Type PVC
Bend Radius 5X Cable OD

 

Electrical Characteristics
Test Type Test Item 24AWG 26AWG 28AWG 30AWG
Electrical Characteristics Differential impedance 100±5Ω 100±5Ω 100±5Ω 100±5Ω
– Mutual capacitance 14pF/ft
nominal		 14pF/ft
nominal		 14pF/ft
nominal		 14pF/ft
nominal
– Time delay 1.31ns/ft
nominal,
(4.3 ns/m)
nominal		 1.35ns/ft
nominal		 1.35ns/ft
nominal		 1.35ns/ft
nominal,
(4.3 ns/m)
nominal
– Time delay skew(within pairs) 80ps/10m
maximum		 120ps/8.5m
maximum		 120ps/7m
maximum		 50ps/5.5m maximum
– Time delay skew(between pairs) 350ps/10m
maximum		 500ps/8.5m
maximum		 500ps/7m
maximum		 350ps/5.5m
maximum
– Attenuation 10dB/10m
maximum
@1.25Ghz		 10dB/8.5m
maximum
@1.25Ghz		 10dB/7m
maximum
@1.25Ghz		 8.4dB/5.5m
maximum
@1.25Ghz
– Conductor DC Resistance 0.026Ω /ft
maximum
@20℃		 0.04Ω/ft
maximum
@ 20℃		 0.06Ω/ft
maximum
@20℃		 0.01Ω/ft
maximum
@20℃
Physical Characteristics Conductors (two pair) 24AWG
Solid,
Silver
plated
copper		 26AWG
Solid,
Silver
plated
copper		 28AWG
Solid,
Silver
plated
copper		 30AWG
Solid, Silver
plated
copper
– Insulation Foam
polyolefin		 Foam
polyolefin		 Foam
polyolefin		 Foam
polyolefin
– Pair drain wire 26AWG
Solid,
Silver
plated
copper		 28AWG
Solid,
Silver
plated
copper		 30AWG
Solid,
Silver
plated
copper		 30AWG
Solid,
Silver
plated
copper
– Overall cable shield Aluminum/
polyester
tape, 125%
coverage,
Tin plated copper
braid,
38AWG, 85%
coverage		 Aluminum/
polyester
tape, 125%
coverage,
Tin plated copper
braid,
38AWG, 85%
coverage		 Aluminum/
polyester
tape, 125%
coverage,
Tin plated copper
braid,
38AWG, 85%
coverage		 Aluminum/
polyester
tape, 125%
coverage,
Tin plated copper
braid,
38AWG, 85%
coverage
– Outer diameter 6.0 mm 5.2 mm 4.7 mm 4.2 mm

 

Pin Designation
Pin Logic Symbol Name/Description Notes
1 – VeeT Transmitter Ground –
2 LV-TTL-O TX_ Fault N/A 1
3 LV-TTL- I TX_ DIS Transmitter Disable –
4 LV-TTL- I/O SDA Tow Wire Serial Data 5 LV –
5 LV-TTL- I SCL Tow Wire Serial Clock –
6 – MOD_ DEF0 Module present, connect to VeeT –
7 LV-TTL- I RS0 N/A 1
8 LV-TTL-O LOS LOS of Signal –
9 LV-TTL- I RS1 N/A 1
10 – VeeR Receiver Ground –
11 – VeeR Receiver Ground –
12 CML-O RD- Receiver Data Inverted –
13 CML-O RD+ Receiver Data Non- Inverted –
14 – VeeR Receiver Ground –
15 – VccR Receiver Supply 3.3V –
16 – VccT Transmitter Supply 3.3V –
17 – VeeT Transmitter Ground –
18 CML- I TD+ Transmitter Data Non- Inverted –
19 CML- I TD- Transmitter Data Inverted –
20 – VeeT Transmitter Ground –

 

PRODUCT CERTIFICATION

 

COMPATIBLE BRANDS
CONFIGURATION INFORMATION
The form can be filled in the actual website url.

 

10G SFP+ to SFP+ Active Direct Attach Copper Twinax Cable (ACC)最先出现在www.philisun.com。

]]>