56G QSFP+ AOC Cables – www.philisun.com https://www.philisun.com Optical transceivers support <strong>10G to 800G</strong> high-speed transmission Fri, 06 Mar 2026 02:29:23 +0000 en-US hourly 1 https://www.philisun.com/wp-content/uploads/2025/10/philisun斐立飒-logo彩色方形-1-100x100.png 56G QSFP+ AOC Cables – www.philisun.com https://www.philisun.com 32 32 56G QSFP+ to QSFP+ Active Optical Cable (AOC) https://www.philisun.com/products/qsfp-56g-aoc/ Thu, 20 Nov 2025 08:44:08 +0000 https://www.philisun.com/?post_type=product&p=3422 Compliant with theSFF-8436 QSFP+ MSA standard
Switch to Switch
Switch to GPU

56G QSFP+ to QSFP+ Active Optical Cable (AOC)最先出现在www.philisun.com。

]]>
SPECIFICATIONS
Cable End Connector AQSFP+Cable End Connector BQSFP+
Jumper TypeDirect-AttachData Rate56G
Aggregate Bit Rate56.1GbpsLane Bit Rate14.0625Gbps
Number of Channels4Single Channel Rate14G
Array TransmitterVSCELArray ReceiverPIN
Minimum Bend Radius30mmFactory BrandPHILISUN
Center(Operating) Wavelength850nmBit Error Rate10-12
Fiber TypeOM2 MMF MAX 82m/OM3 MMF MAX 300mCable ColourOM2:Orange
OM3:Aqua
Cable MaterialLSZH/OFNPCable Length Selection1-300 meter
Safety CertificationTUV/UL/FDAApplication Scenarios56 Gigabit Ethernet (56GbE)
ProtocolsSFF-8436/QSFP+ MSADDMI(Commercial)YES
Supply Voltage3.3VPower Dissipation<1.4W
Operating Temperature0 to 70℃ (32 to 158℉)Storage Temperature-20 to 85℃ (-4to185℉)

 

PRODUCT PRESENTATION
The PHILISUN QSFP+(56G) Active Optical Cable is a direct-attach fiber assembly utilizing QSFP+ connectors and the Multi-Mode Fiber (MMF) scheme. The product complies with the SFF-8436 MSA standard and is suitable for high-speed connections within racks and across adjacent racks. It uses OM3/OM4 Multimode Fiber. Its compact structure and fully sealed integrated optics reduce costs compared to conventional optical modules and jumpers, while significantly improving reliability and reducing maintenance. This AOC guarantees broad compatibility with major vendor platforms including Cisco, H3C, Huawei, Juniper, and Arista, and more.

 

AOC SERIES PRODUCTS

 

PRODUCTION & TESTING EQUIPMENT

 

MODULE BLOCK DIAGRAM

 

PERFORMANCE PARAMETER
Absolute Maximum Rating
Parameter Symbol Min Max Unit
Storage temperature TS -20 85 ℃
Relative humidity RH 0 85 %
Case operating temperature TCase 0 70 ℃
Supply voltage VCC -0.5 3.6 V

 

Recommended Operating Conditions
Parameter Symbol Min Typical Max Unit
Case operating temperature TCase 0 – 70 ℃
Supply voltage VCC 3.15 3.3 3.45 V
Differential data input voltage per lane Vdin 200 – 1200 mVp-p
Data rate per lane DR 2.5 14.025 – Gbit/s

 

Electrical Characteristics
Parameter Symbol Min Typical Max Unit
Bit error ratio BER – – 10-12 –
Differential data output voltage per lane Vdout 320 450 – mVp-p
Differential Termination Resistance Zout 80 100 120 Ohm
Module total power P – – 1.5 W
Transmit turn-on time – 2000 – – ms
Note: Test with PRBS31 pattern

 

PIN DESCRIPTIONS

 

PIN DEFINITIONS
Pin Symbol Name/Description
1 GND Ground
2 Tx2n Transmitter inverted data input
3 Tx2p Transmitter non-inverted data input
4 GND Ground
5 Tx4n Transmitter inverted data input
6 Tx4p Transmitter non-inverted data input
7 GND Ground
8 ModSelL Module select
9 ResetL Module reset
10 Vcc Rx +3.3V Power supply receiver
11 SCL 2-Wireserial interface clock
12 SDA 2-Wireserial interface data
13 GND Ground
14 Rx3p Receiver non-inverted data output
15 Rx3n Receiver inverted data output
16 GND Ground
17 Rx1p Receiver non-inverted data output
18 Rx1n Receiver inverted data output
19 GND Ground
20 GND Ground
21 Rx2n Receiver inverted data output
22 Rx2p Receiver non-inverted data output
23 GND Ground
24 Rx4n Receiver inverted data output
25 Rx4p Receiver non-inverted data output
26 GND Ground
27 ModPrsL Module present
28 IntL Interrupt
29 Vcc Tx +3.3V Power supply transmitter
30 Vcc1 +3.3V Power supply
31 LPMode Low power mode
32 GND Ground
33 Tx3p Transmitter non-inverted data input
34 Tx3n Transmitter inverted data input
35 GND Ground
36 Txlp Transmitter non-inverted data input
37 Txln Transmitter inverted data input
38 GND Ground

 

PRODUCT CERTIFICATION

 

COMPATIBLE BRANDS
CONFIGURATION INFORMATION
The form can be filled in the actual website url.

 

56G QSFP+ to QSFP+ Active Optical Cable (AOC)最先出现在www.philisun.com。

]]>