SFP+ 10G Series – www.philisun.com https://www.philisun.com Optical transceivers support <strong>10G to 800G</strong> high-speed transmission Tue, 02 Dec 2025 08:49:26 +0000 en-US hourly 1 https://www.philisun.com/wp-content/uploads/2025/10/philisun斐立飒-logo彩色方形-1-100x100.png SFP+ 10G Series – www.philisun.com https://www.philisun.com 32 32 Generic Compatible 10GBASE-T SFP+ 30m Copper RJ45 Transceiver Module https://www.philisun.com/products/10gbase-t-30m-rj45/ Mon, 10 Nov 2025 06:33:09 +0000 https://www.philisun.com/?post_type=product&p=2462 SFP+CO-10A-003-RJ45

Generic Compatible 10GBASE-T SFP+ 30m Copper RJ45 Transceiver Module最先出现在www.philisun.com。

]]>
SPECIFICATIONS
Product ModelSFP+CO-10A-003-RJ45Manufacturer BrandPHILISUN
Package TypeSFP+Optical ConnectorRJ45
Max Data Rate10.3Gbps10G Effective Transmission Distance30m
Hot-Pluggable SFPYESOperating voltage3.3V
Power Consumption1.5WProtocolsSFP MSA
SFF-8472
Operating temperature(Extended)-10℃~+70℃Storage Temperature(Commercial)-40℃~+85℃
Operating Temperature(Industrial)-40℃~+85℃Storage Temperature(Industrial)-40℃~+85℃

 

PRODUCT PRESENTATION
The PHILISUN SFP+ Copper 10GBASE-T RJ45 transceiver Small Form Pluggable (SFP ) modules, with a reach of 30 meters, adhere to the SFP Multi Source Agreement (MSA). They are fully compliant with the 10GBASE-T, 1000BASE-T, and 100BASE-TX standards outlined in IEEE 802.3an, 802.3ab, and 802.3au.

 

TRANSCEIVER SERIES PRODUCTS

 

PRODUCTION & TESTING EQUIPMENT

 

PERFORMANCE PARAMETER
Absolute Maximum Ratings
Parameter Symbol Min. Typ. Max. Units
Maximum supply voltage Vcc -0.5 – 4.0 V
Storage temperature TS -40 – 85 °C

 

Normal Operating Condition
Parameter Symbol Min Typ. Max Units
Operating case temperature Tc SFP+CO-10A-003-RJ45 -10 – 70 °C
Supply voltage Vcc 3.15 3.3 3.45 V

 

Electrical Characteristics
Parameter Symbol Min Typ. Max Units Notes/Conditions
+3.3 Volt Electrical Power Interface
Supply current Icc – – 710 mA SFP+CO-10A-003-RJ45
Input voltage Vcc 3.15 3.3 3.45 V –
Low-Speed Signals, Electronic Characteristics
SFP output low VOL 0 – 0.5 V 4.7k to 10k pull-up to host_Vcc, measured at host side of connector
SFP output high VOH Vcc–0.5 – Vcc+0.3 – 4.7k to 10k pull-up to host_Vcc, measured at host side of connector
SFP input low VIL 0 – 0.4 – 4.7k to 10k pull-up to Vcc, measured at SFP side of connector
SFP input high VIH 2.8 – Vcc+0.3 – 4.7k to 10k pull-up to Vcc, measured at SFP side of connector
High-Speed Electrical Interface, Transmission Line-SFP
Tx output impedance Zout,TX – 100 – Ohm –
Rx input impedance Zin,RX – 100 – Ohm –
High-Speed Electrical Interface, Host-SFP
CML Inputs(Differential) Vin 250 – 1200 mV AC coupled inputs
CML outputs(Differential) Vout 350 – 800 mV CML outputs(Differential)
Rise/Fall time Tr,Tf – 20 – psec 20%-80%
Tx input impedance Zin – 100 – Ohm Differential ended
Rx output impedance Zout – 100 – Ohm Differential ended

 

PIN DESCRIPTIONS
Pin No. Name Function Plug Seq. Notes
1 VeeT Transmitter ground 1 –
2 TX Fault Transmitter fault indication 3 Not used
3 TX Disable Transmitter disable 3 Note1
4 MOD-DEF2 Module definition 2 3 Note2
5 MOD-DEF1 Module definition 1 3 Note2
6 MOD-DEF0 Module definition 0 3 Note2
7 RS0 No connection required 3 –
8 LOS Loss of signal 3 RX_LOSS
9 RS1 No connection required 1 –
10 VeeR Receiver ground 1 –
11 VeeR Receiver ground 1 –
12 RD- Inv. Received data out 3 –
13 RD+ Received data out 3 –
14 VeeR Receiver ground 1 –
15 VccR Receiver power 2 –
16 VccT Transmitter power 2 –
17 VeeT Transmitter ground 1 –
18 TD+ Transmit data in 3 –
19 TD- Inv. Transmit data in 3 –
20 VeeT Transmitter ground 1 –
Notes:
Note1: TX disable is an input that is used to shut down the transmitter optical output. It is pulled up within the module with a 4.7–10KΩ resistor. Its states are:
Low (0–0.8V): Transmitter on
(>0.8, < 2.0V): Undefined
High (2.0 – 3.465V): Transmitter DisabledNote2: Mod-Def 0,1,2. These are the module definition pins. They should be pulled up with a 4.7K–10KΩ
resistor on the host board. The pull-up voltage shall be VccT or VccR.
Mod-Def 0 is grounded by the module to indicate that the module is present.
Mod-Def 1 is the clock line of two wire serial interface for serial ID.
Mod-Def 2 is the data line of two wire serial interface for serial ID.

 

The following is the Diagram of host board connector block pin numbers and names

 

SERIAL COMMUNICATION PROTOCOL
PHILISUN Copper SFPs support the 2-wire serial communication protocol outlined in the SFP MSA, These SFP use a 128 byte EEPROM with an address of A0H.

 

EEPROM SERIAL ID MEMORY CONTENTS
Accessing Serial ID Memory uses the 2 wire address 1010000X (A0H). Memory Contents of Serial ID are shown in Table 1.

 

Table 1 Serial ID Memory Contents
Data Addr Field Size(Byte) Name of Filed Description of Field Coded Value Hex
BASE ID FIELDS
0 1 Identifier Typeof serial transceiver SFP+ 03
1 1 Ext.Identifier Extended identifier of type of serial transceiver MOD_DEF 4 04
2 1 Connector Code for connector type RJ45 22
3 8 Transceiver 10G Ethernet compliance codes & infiniband compliance codes – 00
4 Part of SONET compliance codes – 00
5 SONET compliance codes – 00
6 Ethernet compliance codes – 00
7 Fiber channel link length & part of Fibre channel technology – 00
8 Part of fiber channel transmitter technology – 00
9 Fiber channel transmission media – 00
10 Fiber channel speed – 00
11 1 Encoding Code for high speed serial encoding algorithm 64B/66B 06
12 1 BR, Nominal Nominal signalling rate, units of 100MBd. 10.3Gbps 67
13 1 Rate Identifier Typeof rate select functionality – 00
14 1 Length(SMF,km) Link length supported for single mode fiber, units of km – 00
15 1 Length (SMF) Link length supported for single mode fiber, units of 100 m – 00
16 1 Length (50um) Link length supported for 50um OM2 fiber, units of 10 m – 00
17 1 Length (62.5um) Link length supported for 62.5um OM1 fiber, units of 10 m – 00
18 1 Length (Copper) Link length supported for copper, units of meters 30m 1E
19 1 Length (OM3) Link length supported for 50um OM3 fiber, units of 10 m – 00
20 16 Vendor name Vendor name (ASCII) E 45
21 o 6F
22 p 70
23 t 74
24 o 6F
25 l 6C
26 i 69
27 n 6E
28 k 6B
29 <space> 20
30 <space> 20
31 <space> 20
32 <space> 20
33 <space> 20
34 <space> 20
35 <space> 20
36 1 Transceiver Extended compliance codes 10GBASE-T Short Reach (30 meters) 1C
37 3 Vendor OUI SF P vendor IEEE company ID – 00
38 – 00
39 – 00
40 16 Vendor PN Part number provided by vendor (ASCII) E 45
41 O 4F
42 L 4C
43 T 54
44 – 2D
45 C 43
46 9 39
47 6 36
48 – 2D
49 0 30
50 2 32
51 <space>/- 20/2D
52 <space>/I 20/49
53 <space> 20
54 <space> 20
55 <space> 20
56 4 Vendor rev Revision level for part number provided by vendor (ASCII) 1 31
57 – 2E
58 0 30
59 <space> 20
60 2 Wavelength Laser wavelength – 00
61 00
62 1 Reserved 00
63 1 CC_BASE Check code for base ID fields (addresses 0 to 62) Note3 xx
64 2 Options Indicates which optional transceiver signals are implemented TX_DISABLEsignal,Rx_LOS 00
65 12
66 1 BR, max Upper bitrate margin, units of % – 00
67 1 BR, min Lower bitrate margin, units of % – 00
68 16 Vendor SN Serial number provided by vendor(ASCII) x xx
69 x xx
70 x xx
71 x xx
72 x xx
73 x xx
74 x xx
75 x xx
76 x xx
77 x xx
78 <space> 20
79 <space> 20
80 <space> 20
81 <space> 20
82 <space> 20
83 <space> 20
84 8 Date code Vendor’s manufacturing date code Year xx
85 Year xx
86 Month xx
87 Month xx
88 Day xx
89 Day xx
90 <Space> 20
91 <Space> 20
92 1 Diagnostic monitoring type Typeof diagnostic monitoring is implemented diagnostic monitoring is not implemented 00
93 1 Enhanced options Optional enhanced features are implemented Optional enhanced
features are not
implemented		 00
94 1 SFF-8472 Compliance Revision of SFF-8472 the transceiver complies with Digital diagnostic functionality not included or undefined 00
95 1 CC_EXT Check code for the extended ID fields (addresses 64 to 94) Note4 xx
Note3. The check code shall be the low order 8 bits of the sum of the contents of all the bytes from byte 0 to byte 62, inclusive.
Note4. The check code shall be the low order 8 bits of the sum of the contents of all the bytes from byte 64 to byte 94, inclusive.

 

PRODUCT CERTIFICATION

 

QUALITY ADVANTAGE

 

COMPATIBLE BRANDS
CONFIGURATION INFORMATION
The form can be filled in the actual website url.

 

Generic Compatible 10GBASE-T SFP+ 30m Copper RJ45 Transceiver Module最先出现在www.philisun.com。

]]>