GPON OLT Series – www.philisun.com

Generic Compatible C+ GPON OLT 2.5/1.25G 1490/1310nm 20km Simplex SC SMF DOM Optical Transceiver Module

philisun001 — Wed, 13 May 2026 05:27:35 +0000

SPECIFICATIONS
Product Model	SFP-GPON-C+2.5/1.25-1413-20-SCS	Manufacturer Brand	PHILISUN
Package Type	SFP	Optical Connector	SC
Max Data Rate	2.5/1.25Gbps	Class	C+
Effective transmission distance	20KM
Wavelength	1310nm/1490nm 1490nm/1310nm	Operating Voltage	3.3V
Fiber Type	SMF	Core Size	9/125µm
Transmitter Type	DFB	Receiver Type	APD
TX Power	3.5~7dBm	Receiver Sensitivity	-30dBm
Digital Diagnostic Monitoring(DDM)	YES	Receiver Overload	-8dBm
Power Consumption	<1W	Protocols	SFP MSA SFF-8472
Operating temperature(Commercial)	0℃~+70℃	Storage Temperature(Commercial)	-40℃~+85℃
Operating temperature(Industrial)	-40℃~+85℃	Storage Temperature(Industrial)	-40℃~+85℃

PRODUCT PRESENTATION

The PHILISUN GPON OLT C+ 5dBm Transceiver is an enhanced-performance SFP module engineered for Optical Line Terminals, delivering asymmetric data rates of 2.488Gbps downstream (1490nm) and 1.244Gbps upstream (1310nm) over single-mode fiber with 20km reach. Featuring an SC/UPC connector interface and compliant with the GPON C+ class (5dBm optical budget), this transceiver enables bidirectional communication on a single fiber while supporting Digital Diagnostic Monitoring (DDM) per SFF-8472 for real-time parameter tracking. It fully adheres to ITU-T G.984.2 standards and RoHS requirements.

TRANSCEIVER SERIES PRODUCTS

PRODUCTION & TESTING EQUIPMENT

PERFORMANCE PARAMETER

Absolute Maximum Ratings
Parameter	Symbol	Min.	Max.	Unit
Storage Temperature	TS	-40	+85	℃
Operating Temperature	Top	0	+70	℃
Supply Voltage	VCC	-0.5	+3.6	V
Power Supply Current	ICC	–	400	mA
Voltage at Any Input Pin	VIN	0	Vcc	V

Recommended Operating Environment
Parameter	Symbol	Min.	Typical	Max.	Unit
Operating Temperature	Top	0	–	+70	℃
Supply Voltage	VCC	3.1	3.3	3.5	V
Tx Data Rate	–	–	2488	–	Mb/s
Rx Data Rate	–	–	1244	–	Mb/s

Electrical
Parameter	Symbol	Min.		Typ.	Max.	Unit
Transmitter（T=0 to +70℃, VCC =3.1~3.5V)
Central Wavelength	λC	1480		1490	1500	nm
Spectral Width	Δλ	–		–	1	nm
Side Mode Suppression Ratio	SMSR	30		–	–	dB
Output Power	Po	3.5		–	7	dBm
Extinction Ratio	ER	8.2		–	–	dB
Output Power at Transmit Off	–	–		–	-40	dBm
Differential Input Voltage	VIH- VIL	200		–	1600	mV
TX Disable Input Voltage Low	TX_DISABLEL	0		–	0.8	V
TX Disable Input Voltage High	TX_DISABLEH	2.0		–	Vcc	V
TX Fault Output Voltage Low	TX_FAULTL	0		–	0.8	V
TX Fault Output Voltage High	TX_FAULTH	2.0		–	VCC+0.3	V
Eye Diagram	Compliance with ITU-T G.984.2
Receiver（T=0 to +70℃, VCC =3.1~3.5V)
Wavelength Range	λ		1260	–	1360	nm
MIN. Input Power (Sensitivity)	PMIN		–	–	-30	dBm
MAX. Input Power (Saturation)	PMAX		-12	–	–	dBm
Signal Detect-Asserted	PA		–	–	-30	dBm
Signal Detect-Deasserted	PD		-45	–	–	dBm
Signal Detect Hysteresis	PHYS		0.5	–	6	dB
Return Loss	ORL		12	–	–	dB
RX Loss of Signal Output Voltage Low	RX_LOSL		0	–	0.8	V
RX Loss of Signal Output Voltage High	RX_LOSH		2.0	–	VCC+0.3	V
LOS Assert Time	TAssert		–	–	100	ns
LOS De-assert Time	TDeassert		–	–	12.8	ns

Digital RSSI Timing Specification
Parameter	Minimum	Typical	Maximum	Unit	Notes
RSSI Trigger Delay	25	–	–	ns	–
RSSI Sampling Time	300	–	–	ns	–
Internal I2C Delay	–	–	500	us	–
Receiver Power DDM(RSSI) Error	–	–	+/-3	dB	–
a) RSSI_ACQ input signal rising edge will trigger RSSI sampling, and falling edge will trigger internal digital RSSI information written to I2C. It is recommended that host shall not trigger RSSI_ACQ input again until RSSI data is valid inI2C from previous RSSI trigger. b) RSSI DDM working range is between -8 to -28dBm. RSSI DDM accuracy is better than +/-3dB for input power level between -10 to -28dBm, the accuracy reduces to +/-5dBm to -10 dBm. If the data pattern is at least 2^7-1 or longer, a minimum average of 8 times is strongly recommended to maintain the RSSI reading accuracy.

EEPROM Serial ID Memory Contents (A0h)
Address	Size(Bytes)	Name of Field	Hex	Description of Field
0	1	Identifier	03	SFP
1	1	Ext. Identifier	04	MOD4
2	1	Connector	01	SC
3—10	8	Transceiver	00 00 00 00 00 00 00 00	Transceiver Code Field,not applicable
11	1	Encoding	03	NRZ encoding
12	1	BR, nominal	19	2488.32Mbps
13	1	Reserved	00	Reserved
14	1	Length(9um)-km	14	20(Units of km)
15	1	Length (9um)	C8	200(Units of 100 m)
16	1	Length (50um)	00	Not Support MMF
17	1	Length (62.5um)	00	Not Support MMF
18	1	Length (copper)	00	Not Support Copper
19	1	Reserved	00	–
20—35	16	Vendor name	XXXXX	“ODI”
36	1	Reserved	00	–
37—39	3	Vendor OUI	000000	–
40—55	16	Vendor PN	XXXXX	“PART NUMBER ” (ASCⅡ)
56—59	4	Vendor rev	xxxx xxxx	ASCⅡ (“31 2E 31 20” means 1. 1 revision)
60-61	2	Wavelength	05 D2	1490nm Laser wavelength
62	1	Reserved	00	–
63	1	CC BASE	xx	Checksum of bytes 0 – 62
64—65	2	Options	00 1A	LOS, TX_FAULT and TX_DISABLE
66	1	BR, max	00	–
67	1	BR, min	00	–
68—83	16	Vendor SN	xxxx xxxx xxxx xxxx xxxx xxxx xxxx xxxx	SN ：xxxxxxxxx (ASCⅡ)
84—91	8	Vendor date code	xxxx xxxx xxxx 20 20	Year (2 bytes), Month (2 bytes), Day (2bytes) (ASCⅡ)
92	1	Diagnostic type	58	Externally Calibrated
93	1	Enhanced option	B0	Diagnostic(Optional Alarm/warning flags) Soft TX_FAULT monitoring implemented Soft RX_LOS monitoring implemented
94	1	SFF-8472	01	Includes functionality described in Rev 9. 4 SFF-8472
95	1	CC_EXT	xx	Checksum of bytes 64 – 94
96—127	32	Vendor specific	–	Vendor Specific EEPROM
128-255	128	Reserved	–	Reserved for future use.
Note： 1.The“ xx” byte should be filled in according to practical case. 2. Note that, A0H is readable and writeable , A2H is readable and write-protected.

Pins Assignment

Function Definition
Pin No.	Name	Function	Plug Seq.	Notes
1	VeeT	Tx Ground	1	–
2	TX Fault	Transmitter Fault Indication,LVTTL Output Active High	3	Note 1
3	TX Disable	Transmitter Disable,LVTTL input.	3	Note 2
4	MOD-DEF2	2-Write Serial Data I/O Pin.	3	Note 3
5	MOD-DEF1	2-Write Serial Data I/O Pin.	3	Note 3
6	MOD-DEF0	Internally Grounded	3	Note 3
7	Reset	CMOS input.Assert “Reset”high at the end of previous burst,2 byte in duration	3	–
8	BRST_Det	LVTTL output.BRST_Det assert low when module receives“reset”signal, assert high when incoming burst is present.	3	Note 4
9	RSSI_ACQ	RSSI acquire/hold LVTTL input. Digital RSSI output through I2C	1	–
10	VeeR	Receiver Ground	1	–
11	VeeR	Receiver Ground	1	–
12	RD-	Inv. Received Data Out	3	Note 5
13	RD+	Received Data Out	3	Note 5
14	VeeR	Receiver Ground	1	–
15	VccR	Receiver Power	2	–
16	VccT	Transmitter Power	2	–
17	VeeT	Transmitter Ground	1	–
18	TD+	Transmit Data In	3	Note 6
19	TD-	Inv Transmit Data In	3	Note 6
20	VeeT	Transmitter Ground	1	–
Notes: 1. TX Fault is an open collector output, which should be pulled up with a 4.7K~10KΩ resistor on the host board to a voltage between 2.0V and Vcc+0.3V. Logic 0 indicates normal operation; logic 1 indicates a laser fault of some kind. In the low state, the output will be pulled to less than 0.8V.2. TX Disable is an input that is used to shut down the transmitter optical output. It is pulled up within the module with a 4.7K~10KΩ resistor. Its states are: Low (0~0.8V): Transmitter on (>0.8V, <2.0V): Undefined High (2.0~3.465V): Transmitter Disabled Open:Transmitter Disabled.3. MOD-DEF 0,1,2 are the module definition pins. They should be pulled up with a 4.7K~10KΩ resistor on the host board. The pull-up voltage shall be VccT or VccR. MOD-DEF 0 is grounded by the module to indicate that the module is present. MOD-DEF 1 isthe clock line of two wire serial interface for serial ID. MOD-DEF 2 isthe data line of two wire serial interface for serial ID.4. LOS is an open collector output, which should be pulled up with a 4.7K~10KΩ resistor on the host board to a voltage between 2.0V and Vcc+0.3V. Logic 0 indicates normal operation; logic 1 indicates loss of signal. In the low state, the output will be pulled to less than 0.8V.5. These are the differential receiver outputs. They are AC coupled 100Ω differential lines which should be terminated with 100Ω (differential) atthe user SERDES.6. These are the differential transmitter inputs. They are AC-coupled, differential lines with 100Ω differential termination inside the module.

PRODUCT CERTIFICATION

QUALITY ADVANTAGE

COMPATIBLE BRANDS

CONFIGURATION INFORMATION

The form can be filled in the actual website url.

Generic Compatible C+ GPON OLT 2.5/1.25G 1490/1310nm 20km Simplex SC SMF DOM Optical Transceiver Module最先出现在www.philisun.com。

Generic Compatible C++ 7dBm GPON OLT 2.5/1.25G 1490/1310nm 20km Simplex SC SMF DOM Optical Transceiver Module

philisun001 — Wed, 13 May 2026 05:09:01 +0000

SPECIFICATIONS
Product Model	SFP-GPON-C++2.5/1.25-1413-20-SCS	Manufacturer Brand	PHILISUN
Package Type	SFP	Optical Connector	SC
Max Data Rate	2.5/1.25Gbps	Class	C++
Effective transmission distance	20KM
Wavelength	1310nm/1490nm 1490nm/1310nm	Operating Voltage	3.3V
Fiber Type	SMF	Core Size	9/125µm
Transmitter Type	DFB	Receiver Type	APD
TX Power	4.5~10dBm	Receiver Sensitivity	-31dBm
Digital Diagnostic Monitoring(DDM)	YES	Receiver Overload	-8dBm
Power Consumption	<1W	Protocols	SFP MSA SFF-8472
Operating temperature(Commercial)	0℃~+70℃	Storage Temperature(Commercial)	-40℃~+85℃
Operating temperature(Industrial)	-40℃~+85℃	Storage Temperature(Industrial)	-40℃~+85℃

PRODUCT PRESENTATION

The PHILISUN GPON OLT C++ 7dBm Transceiver is a premium-grade SFP module engineered for Optical Line Terminal applications, delivering high-speed asymmetric data transmission at 2.488Gbps downstream (1490nm) and 1.244Gbps upstream (1310nm) over single-mode fiber with 20km reach. Featuring an SC/UPC connector interface and compliant with the enhanced GPON C++ class offering a 7dBm optical budget, this transceiver enables bidirectional communication on a single fiber while supporting Digital Diagnostic Monitoring (DDM) per SFF-8472 for real-time performance tracking. It fully meets ITU-T G.984.2 standards and RoHS compliance requirements.

TRANSCEIVER SERIES PRODUCTS

PRODUCTION & TESTING EQUIPMENT

PERFORMANCE PARAMETER

Absolute Maximum Ratings
Parameter	Symbol	Min.	Max.	Unit
Storage Temperature	TS	-40	+85	℃
Operating Temperature	Top	0	+70	℃
Supply Voltage	VCC	-0.5	+3.6	V
Power Supply Current	ICC	–	400	mA
Voltage at Any Input Pin	VIN	0	Vcc	V

Recommended Operating Environment
Parameter	Symbol	Min.	Typical	Max.	Unit
Operating Temperature	Top	0	–	+70	℃
Supply Voltage	VCC	3.1	3.3	3.5	V
Tx Data Rate	–	–	2488	–	Mb/s
Rx Data Rate	–	–	1244	–	Mb/s

Electrical
Parameter	Symbol	Min.		Typ.	Max.	Unit
Transmitter（T=0 to +70℃, VCC =3.1~3.5V)
Central Wavelength	λC	1480		1490	1500	nm
Spectral Width	Δλ	–		–	1	nm
Side Mode Suppression Ratio	SMSR	30		–	–	dB
Output Power	Po	4.5		–	10	dBm
Extinction Ratio	ER	8.2		–	–	dB
Output Power at Transmit Off	–	–		–	-40	dBm
Differential Input Voltage	VIH- VIL	200		–	1600	mV
TX Disable Input Voltage Low	TX_DISABLEL	0		–	0.8	V
TX Disable Input Voltage High	TX_DISABLEH	2.0		–	Vcc	V
TX Fault Output Voltage Low	TX_FAULTL	0		–	0.8	V
TX Fault Output Voltage High	TX_FAULTH	2.0		–	VCC+0.3	V
Eye Diagram	Compliance with ITU-T G.984.2
Receiver（T=0 to +70℃, VCC =3.1~3.5V)
Wavelength Range	λ		1260	–	1360	nm
MIN. Input Power (Sensitivity)	PMIN		–	–	-31	dBm
MAX. Input Power (Saturation)	PMAX		-12	–	–	dBm
Signal Detect-Asserted	PA		–	–	-30	dBm
Signal Detect-Deasserted	PD		-45	–	–	dBm
Signal Detect Hysteresis	PHYS		0.5	–	6	dB
Return Loss	ORL		12	–	–	dB
RX Loss of Signal Output Voltage Low	RX_LOSL		0	–	0.8	V
RX Loss of Signal Output Voltage High	RX_LOSH		2.0	–	VCC+0.3	V
LOS Assert Time	TAssert		–	–	100	ns
LOS De-assert Time	TDeassert		–	–	12.8	ns

Digital RSSI Timing Specification
Parameter	Minimum	Typical	Maximum	Unit	Notes
RSSI Trigger Delay	25	–	–	ns	–
RSSI Sampling Time	300	–	–	ns	–
Internal I2C Delay	–	–	500	us	–
Receiver Power DDM(RSSI) Error	–	–	+/-3	dB	–
a) RSSI_ACQ input signal rising edge will trigger RSSI sampling, and falling edge will trigger internal digital RSSI information written to I2C. It is recommended that host shall not trigger RSSI_ACQ input again until RSSI data is valid inI2C from previous RSSI trigger. b) RSSI DDM working range is between -8 to -28dBm. RSSI DDM accuracy is better than +/-3dB for input power level between -10 to -28dBm, the accuracy reduces to +/-5dBm to -10 dBm. If the data pattern is at least 2^7-1 or longer, a minimum average of 8 times is strongly recommended to maintain the RSSI reading accuracy.

EEPROM Serial ID Memory Contents (A0h)
Address	Size(Bytes)	Name of Field	Hex	Description of Field
0	1	Identifier	03	SFP
1	1	Ext. Identifier	04	MOD4
2	1	Connector	01	SC
3—10	8	Transceiver	00 00 00 00 00 00 00 00	Transceiver Code Field,not applicable
11	1	Encoding	03	NRZ encoding
12	1	BR, nominal	19	2488.32Mbps
13	1	Reserved	00	Reserved
14	1	Length(9um)-km	14	20(Units of km)
15	1	Length (9um)	C8	200(Units of 100 m)
16	1	Length (50um)	00	Not Support MMF
17	1	Length (62.5um)	00	Not Support MMF
18	1	Length (copper)	00	Not Support Copper
19	1	Reserved	00	–
20—35	16	Vendor name	XXXXX	“ODI”
36	1	Reserved	00	–
37—39	3	Vendor OUI	000000	–
40—55	16	Vendor PN	XXXXX	“PART NUMBER ” (ASCⅡ)
56—59	4	Vendor rev	xxxx xxxx	ASCⅡ (“31 2E 31 20” means 1. 1 revision)
60-61	2	Wavelength	05 D2	1490nm Laser wavelength
62	1	Reserved	00	–
63	1	CC BASE	xx	Checksum of bytes 0 – 62
64—65	2	Options	00 1A	LOS, TX_FAULT and TX_DISABLE
66	1	BR, max	00	–
67	1	BR, min	00	–
68—83	16	Vendor SN	xxxx xxxx xxxx xxxx xxxx xxxx xxxx xxxx	SN ：xxxxxxxxx (ASCⅡ)
84—91	8	Vendor date code	xxxx xxxx xxxx 20 20	Year (2 bytes), Month (2 bytes), Day (2bytes) (ASCⅡ)
92	1	Diagnostic type	58	Externally Calibrated
93	1	Enhanced option	B0	Diagnostic(Optional Alarm/warning flags) Soft TX_FAULT monitoring implemented Soft RX_LOS monitoring implemented
94	1	SFF-8472	01	Includes functionality described in Rev 9. 4 SFF-8472
95	1	CC_EXT	xx	Checksum of bytes 64 – 94
96—127	32	Vendor specific	–	Vendor Specific EEPROM
128-255	128	Reserved	–	Reserved for future use.
Note： 1.The“ xx” byte should be filled in according to practical case. 2. Note that, A0H is readable and writeable , A2H is readable and write-protected.

Pins Assignment

Function Definition
Pin No.	Name	Function	Plug Seq.	Notes
1	VeeT	Tx Ground	1	–
2	TX Fault	Transmitter Fault Indication,LVTTL Output Active High	3	Note 1
3	TX Disable	Transmitter Disable,LVTTL input.	3	Note 2
4	MOD-DEF2	2-Write Serial Data I/O Pin.	3	Note 3
5	MOD-DEF1	2-Write Serial Data I/O Pin.	3	Note 3
6	MOD-DEF0	Internally Grounded	3	Note 3
7	Reset	CMOS input.Assert “Reset”high at the end of previous burst,2 byte in duration	3	–
8	BRST_Det	LVTTL output.BRST_Det assert low when module receives“reset”signal, assert high when incoming burst is present.	3	Note 4
9	RSSI_ACQ	RSSI acquire/hold LVTTL input. Digital RSSI output through I2C	1	–
10	VeeR	Receiver Ground	1	–
11	VeeR	Receiver Ground	1	–
12	RD-	Inv. Received Data Out	3	Note 5
13	RD+	Received Data Out	3	Note 5
14	VeeR	Receiver Ground	1	–
15	VccR	Receiver Power	2	–
16	VccT	Transmitter Power	2	–
17	VeeT	Transmitter Ground	1	–
18	TD+	Transmit Data In	3	Note 6
19	TD-	Inv Transmit Data In	3	Note 6
20	VeeT	Transmitter Ground	1	–
Notes: 1. TX Fault is an open collector output, which should be pulled up with a 4.7K~10KΩ resistor on the host board to a voltage between 2.0V and Vcc+0.3V. Logic 0 indicates normal operation; logic 1 indicates a laser fault of some kind. In the low state, the output will be pulled to less than 0.8V.2. TX Disable is an input that is used to shut down the transmitter optical output. It is pulled up within the module with a 4.7K~10KΩ resistor. Its states are: Low (0~0.8V): Transmitter on (>0.8V, <2.0V): Undefined High (2.0~3.465V): Transmitter Disabled Open:Transmitter Disabled.3. MOD-DEF 0,1,2 are the module definition pins. They should be pulled up with a 4.7K~10KΩ resistor on the host board. The pull-up voltage shall be VccT or VccR. MOD-DEF 0 is grounded by the module to indicate that the module is present. MOD-DEF 1 isthe clock line of two wire serial interface for serial ID. MOD-DEF 2 isthe data line of two wire serial interface for serial ID.4. LOS is an open collector output, which should be pulled up with a 4.7K~10KΩ resistor on the host board to a voltage between 2.0V and Vcc+0.3V. Logic 0 indicates normal operation; logic 1 indicates loss of signal. In the low state, the output will be pulled to less than 0.8V.5. These are the differential receiver outputs. They are AC coupled 100Ω differential lines which should be terminated with 100Ω (differential) atthe user SERDES.6. These are the differential transmitter inputs. They are AC-coupled, differential lines with 100Ω differential termination inside the module.

PRODUCT CERTIFICATION

QUALITY ADVANTAGE

COMPATIBLE BRANDS

CONFIGURATION INFORMATION

The form can be filled in the actual website url.

Generic Compatible C++ 7dBm GPON OLT 2.5/1.25G 1490/1310nm 20km Simplex SC SMF DOM Optical Transceiver Module最先出现在www.philisun.com。

Generic Compatible C+++ 9dBm GPON OLT 2.5/1.25G 1490/1310nm 20km Simplex SC SMF DOM Optical Transceiver Module

philisun001 — Wed, 13 May 2026 03:43:51 +0000

SPECIFICATIONS
Product Model	SFP-GPON-C+++9dBm-2.5/1.25-1413-20-SCS	Manufacturer Brand	PHILISUN
Package Type	SFP	Optical Connector	SC
Max Data Rate	2.5/1.25Gbps	Class	C+++
Effective transmission distance	20KM
Wavelength	1310nm/1490nm 1490nm/1310nm	Operating Voltage	3.3V
Fiber Type	SMF	Core Size	9/125µm
Transmitter Type	DFB	Receiver Type	APD
TX Power	8~11dBm	Receiver Sensitivity	-31dBm
Digital Diagnostic Monitoring(DDM)	YES	Receiver Overload	-8dBm
Power Consumption	<1W	Protocols	SFP MSA SFF-8472
Operating temperature(Commercial)	0℃~+70℃	Storage Temperature(Commercial)	-40℃~+85℃
Operating temperature(Industrial)	-40℃~+85℃	Storage Temperature(Industrial)	-40℃~+85℃

PRODUCT PRESENTATION

The PHILISUN OLT C+++ 9dBm Transceiver delivers pinnacle performance for Optical Line Terminals, enabling 2.488Gbps downstream (1490nm) and 1.244Gbps upstream (1310nm) transmission over single-mode fiber at 20km distances via an SC/UPC connector. Compliant with the premium GPON C+++ class offering an industry-leading 9dBm optical budget, this SFP module integrates bidirectional communication on a single fiber while providing comprehensive Digital Diagnostic Monitoring (DDM) per SFF-8472 for real-time parameter analysis. Fully compliant with ITU-T G.984.2, SFF-8472, and RoHS standards.

TRANSCEIVER SERIES PRODUCTS

PRODUCTION & TESTING EQUIPMENT

PERFORMANCE PARAMETER

Absolute Maximum Ratings
Parameter	Symbol	Min.	Max.	Unit
Storage Temperature	TS	-40	+85	℃
Operating Temperature	Top	0	+70	℃
Supply Voltage	VCC	-0.5	+3.6	V
Power Supply Current	ICC	–	400	mA
Voltage at Any Input Pin	VIN	0	Vcc	V

Recommended Operating Environment
Parameter	Symbol	Min.	Typical	Max.	Unit
Operating Temperature	Top	0	–	+70	℃
Supply Voltage	VCC	3.1	3.3	3.5	V
Tx Data Rate	–	–	2488	–	Mb/s
Rx Data Rate	–	–	1244	–	Mb/s

Electrical
Parameter	Symbol	Min.		Typ.	Max.	Unit
Transmitter（T=0 to +70℃, VCC =3.1~3.5V)
Central Wavelength	λC	1480		1490	1500	nm
Spectral Width	Δλ	–		–	1	nm
Side Mode Suppression Ratio	SMSR	30		–	–	dB
Output Power for C+++9	Po	8		9	11	dBm
Output Power for C++	Po	4.5		–	9	dBm
Extinction Ratio	ER	8.2		–	–	dB
Output Power at Transmit Off	–	–		–	-40	dBm
Differential Input Voltage	VIH- VIL	200		–	1600	mV
TX Disable Input Voltage Low	TX_DISABLEL	0		–	0.8	V
TX Disable Input Voltage High	TX_DISABLEH	2.0		–	Vcc	V
TX Fault Output Voltage Low	TX_FAULTL	0		–	0.8	V
TX Fault Output Voltage High	TX_FAULTH	2.0		–	VCC+0.3	V
Eye Diagram	Compliance with ITU-T G.984.2
Receiver（T=0 to +70℃, VCC =3.1~3.5V)
Wavelength Range	λ		1260	–	1360	nm
MIN. Input Power (Sensitivity)	PMIN		–	–	-31	dBm
MAX. Input Power (Saturation)	PMAX		-12	–	–	dBm
Signal Detect-Asserted	PA		–	–	-30	dBm
Signal Detect-Deasserted	PD		-45	–	–	dBm
Signal Detect Hysteresis	PHYS		0.5	–	6	dB
Return Loss	ORL		12	–	–	dB
RX Loss of Signal Output Voltage Low	RX_LOSL		0	–	0.8	V
RX Loss of Signal Output Voltage High	RX_LOSH		2.0	–	VCC+0.3	V
LOS Assert Time	TAssert		–	–	100	ns
LOS De-assert Time	TDeassert		–	–	12.8	ns

Digital RSSI Timing Specification
Parameter	Minimum	Typical	Maximum	Unit	Notes
RSSI Trigger Delay	25	–	–	ns	–
RSSI Sampling Time	300	–	–	ns	–
Internal I2C Delay	–	–	500	us	–
Receiver Power DDM(RSSI) Error	–	–	+/-3	dB	–
a) RSSI_ACQ input signal rising edge will trigger RSSI sampling, and falling edge will trigger internal digital RSSI information written to I2C. It is recommended that host shall not trigger RSSI_ACQ input again until RSSI data is valid inI2C from previous RSSI trigger. b) RSSI DDM working range is between -8 to -28dBm. RSSI DDM accuracy is better than +/-3dB for input power level between -10 to -28dBm, the accuracy reduces to +/-5dBm to -10 dBm. If the data pattern is at least 2^7-1 or longer, a minimum average of 8 times is strongly recommended to maintain the RSSI reading accuracy.

EEPROM Serial ID Memory Contents (A0h)
Address	Size(Bytes)	Name of Field	Hex	Description of Field
0	1	Identifier	03	SFP
1	1	Ext. Identifier	04	MOD4
2	1	Connector	01	SC
3—10	8	Transceiver	00 00 00 00 00 00 00 00	Transceiver Code Field,not applicable
11	1	Encoding	03	NRZ encoding
12	1	BR, nominal	19	2488.32Mbps
13	1	Reserved	00	Reserved
14	1	Length(9um)-km	14	20(Units of km)
15	1	Length (9um)	C8	200(Units of 100 m)
16	1	Length (50um)	00	Not Support MMF
17	1	Length (62.5um)	00	Not Support MMF
18	1	Length (copper)	00	Not Support Copper
19	1	Reserved	00	–
20—35	16	Vendor name	XXXXX	“ODI”
36	1	Reserved	00	–
37—39	3	Vendor OUI	000000	–
40—55	16	Vendor PN	XXXXX	“PART NUMBER ” (ASCⅡ)
56—59	4	Vendor rev	xxxx xxxx	ASCⅡ (“31 2E 31 20” means 1. 1 revision)
60-61	2	Wavelength	05 D2	1490nm Laser wavelength
62	1	Reserved	00	–
63	1	CC BASE	xx	Checksum of bytes 0 – 62
64—65	2	Options	00 1A	LOS, TX_FAULT and TX_DISABLE
66	1	BR, max	00	–
67	1	BR, min	00	–
68—83	16	Vendor SN	xxxx xxxx xxxx xxxx xxxx xxxx xxxx xxxx	SN ：xxxxxxxxx (ASCⅡ)
84—91	8	Vendor date code	xxxx xxxx xxxx 20 20	Year (2 bytes), Month (2 bytes), Day (2bytes) (ASCⅡ)
92	1	Diagnostic type	58	Externally Calibrated
93	1	Enhanced option	B0	Diagnostic(Optional Alarm/warning flags) Soft TX_FAULT monitoring implemented Soft RX_LOS monitoring implemented
94	1	SFF-8472	01	Includes functionality described in Rev 9. 4 SFF-8472
95	1	CC_EXT	xx	Checksum of bytes 64 – 94
96—127	32	Vendor specific	–	Vendor Specific EEPROM
128-255	128	Reserved	–	Reserved for future use.
Note： 1.The“ xx” byte should be filled in according to practical case. 2. Note that, A0H is readable and writeable , A2H is readable and write-protected.

Pins Assignment

Function Definition
Pin No.	Name	Function	Plug Seq.	Notes
1	VeeT	Tx Ground	1	–
2	TX Fault	Transmitter Fault Indication,LVTTL Output Active High	3	Note 1
3	TX Disable	Transmitter Disable,LVTTL input.	3	Note 2
4	MOD-DEF2	2-Write Serial Data I/O Pin.	3	Note 3
5	MOD-DEF1	2-Write Serial Data I/O Pin.	3	Note 3
6	MOD-DEF0	Internally Grounded	3	Note 3
7	Reset	CMOS input.Assert “Reset”high at the end of previous burst,2 byte in duration	3	–
8	BRST_Det	LVTTL output.BRST_Det assert low when module receives“reset”signal, assert high when incoming burst is present.	3	Note 4
9	RSSI_ACQ	RSSI acquire/hold LVTTL input. Digital RSSI output through I2C	1	–
10	VeeR	Receiver Ground	1	–
11	VeeR	Receiver Ground	1	–
12	RD-	Inv. Received Data Out	3	Note 5
13	RD+	Received Data Out	3	Note 5
14	VeeR	Receiver Ground	1	–
15	VccR	Receiver Power	2	–
16	VccT	Transmitter Power	2	–
17	VeeT	Transmitter Ground	1	–
18	TD+	Transmit Data In	3	Note 6
19	TD-	Inv Transmit Data In	3	Note 6
20	VeeT	Transmitter Ground	1	–
Notes: 1. TX Fault is an open collector output, which should be pulled up with a 4.7K~10KΩ resistor on the host board to a voltage between 2.0V and Vcc+0.3V. Logic 0 indicates normal operation; logic 1 indicates a laser fault of some kind. In the low state, the output will be pulled to less than 0.8V.2. TX Disable is an input that is used to shut down the transmitter optical output. It is pulled up within the module with a 4.7K~10KΩ resistor. Its states are: Low (0~0.8V): Transmitter on (>0.8V, <2.0V): Undefined High (2.0~3.465V): Transmitter Disabled Open:Transmitter Disabled.3. MOD-DEF 0,1,2 are the module definition pins. They should be pulled up with a 4.7K~10KΩ resistor on the host board. The pull-up voltage shall be VccT or VccR. MOD-DEF 0 is grounded by the module to indicate that the module is present. MOD-DEF 1 isthe clock line of two wire serial interface for serial ID. MOD-DEF 2 isthe data line of two wire serial interface for serial ID.4. LOS is an open collector output, which should be pulled up with a 4.7K~10KΩ resistor on the host board to a voltage between 2.0V and Vcc+0.3V. Logic 0 indicates normal operation; logic 1 indicates loss of signal. In the low state, the output will be pulled to less than 0.8V.5. These are the differential receiver outputs. They are AC coupled 100Ω differential lines which should be terminated with 100Ω (differential) atthe user SERDES.6. These are the differential transmitter inputs. They are AC-coupled, differential lines with 100Ω differential termination inside the module.

PRODUCT CERTIFICATION

QUALITY ADVANTAGE

COMPATIBLE BRANDS

CONFIGURATION INFORMATION

The form can be filled in the actual website url.

Generic Compatible C+++ 9dBm GPON OLT 2.5/1.25G 1490/1310nm 20km Simplex SC SMF DOM Optical Transceiver Module最先出现在www.philisun.com。

Generic Compatible C+++ 8dBm GPON OLT 2.5/1.25G 1490/1310nm 20km Simplex SC SMF DOM Optical Transceiver Module

philisun001 — Tue, 12 May 2026 10:16:47 +0000

SPECIFICATIONS
Product Model	SFP-GPON-C+++8dBm-2.5/1.25-1413-20-SCS	Manufacturer Brand	PHILISUN
Package Type	SFP	Optical Connector	SC
Max Data Rate	2.5/1.25Gbps	Class	C+++
Effective transmission distance	20KM
Wavelength	1310nm/1490nm 1490nm/1310nm	Operating Voltage	3.3V
Fiber Type	SMF	Core Size	9/125µm
Transmitter Type	DFB	Receiver Type	APD
TX Power	7~11dBm	Receiver Sensitivity	-30dBm
Digital Diagnostic Monitoring(DDM)	YES	Receiver Overload	-8dBm
Power Consumption	<1W	Protocols	SFP MSA SFF-8472
Operating temperature(Commercial)	0℃~+70℃	Storage Temperature(Commercial)	-40℃~+85℃
Operating temperature(Industrial)	-40℃~+85℃	Storage Temperature(Industrial)	-40℃~+85℃

PRODUCT PRESENTATION

The PHILISUN GPON OLT C+++ 8dBm Transceiver represents the highest-grade SFP solution for Optical Line Terminals, delivering peak performance with 2.488Gbps downstream (1490nm) and 1.244Gbps upstream (1310nm) transmission over single-mode fiber at 20km distances. Featuring an SC/UPC connector interface and compliant with the premium GPON C+++ class offering an industry-leading 8dBm optical budget, this transceiver enables bidirectional communication on a single fiber while supporting advanced Digital Diagnostic Monitoring (DDM) per SFF-8472 for real-time parameter analysis. It fully complies with ITU-T G.984.2, SFF-8472, and RoHS standards.

TRANSCEIVER SERIES PRODUCTS

PRODUCTION & TESTING EQUIPMENT

PERFORMANCE PARAMETER

Absolute Maximum Ratings
Parameter	Symbol	Min.	Max.	Unit
Storage Temperature	TS	-40	+85	℃
Operating Temperature	Top	0	+70	℃
Supply Voltage	VCC	-0.5	+3.6	V
Power Supply Current	ICC	–	400	mA
Voltage at Any Input Pin	VIN	0	Vcc	V

Recommended Operating Environment
Parameter	Symbol	Min.	Typical	Max.	Unit
Operating Temperature	Top	0	–	+70	℃
Supply Voltage	VCC	3.1	3.3	3.5	V
Tx Data Rate	–	–	2488	–	Mb/s
Rx Data Rate	–	–	1244	–	Mb/s

Electrical
Parameter	Symbol	Min.		Typ.	Max.	Unit
Transmitter（T=0 to +70℃, VCC =3.1~3.5V)
Central Wavelength	λC	1480		1490	1500	nm
Spectral Width	Δλ	–		–	1	nm
Side Mode Suppression Ratio	SMSR	30		–	–	dB
Output Power for C+++9	Po	7		8	11	dBm
Output Power for C++	Po	4.5		–	9	dBm
Extinction Ratio	ER	8.2		–	–	dB
Output Power at Transmit Off	–	–		–	-40	dBm
Differential Input Voltage	VIH- VIL	200		–	1600	mV
TX Disable Input Voltage Low	TX_DISABLEL	0		–	0.8	V
TX Disable Input Voltage High	TX_DISABLEH	2.0		–	Vcc	V
TX Fault Output Voltage Low	TX_FAULTL	0		–	0.8	V
TX Fault Output Voltage High	TX_FAULTH	2.0		–	VCC+0.3	V
Eye Diagram	Compliance with ITU-T G.984.2
Receiver（T=0 to +70℃, VCC =3.1~3.5V)
Wavelength Range	λ		1260	–	1360	nm
MIN. Input Power (Sensitivity)	PMIN		–	–	-31	dBm
MAX. Input Power (Saturation)	PMAX		-12	–	–	dBm
Signal Detect-Asserted	PA		–	–	-30	dBm
Signal Detect-Deasserted	PD		-45	–	–	dBm
Signal Detect Hysteresis	PHYS		0.5	–	6	dB
Return Loss	ORL		12	–	–	dB
RX Loss of Signal Output Voltage Low	RX_LOSL		0	–	0.8	V
RX Loss of Signal Output Voltage High	RX_LOSH		2.0	–	VCC+0.3	V
LOS Assert Time	TAssert		–	–	100	ns
LOS De-assert Time	TDeassert		–	–	12.8	ns

Digital RSSI Timing Specification
Parameter	Minimum	Typical	Maximum	Unit	Notes
RSSI Trigger Delay	25	–	–	ns	–
RSSI Sampling Time	300	–	–	ns	–
Internal I2C Delay	–	–	500	us	–
Receiver Power DDM(RSSI) Error	–	–	+/-3	dB	–
a) RSSI_ACQ input signal rising edge will trigger RSSI sampling, and falling edge will trigger internal digital RSSI information written to I2C. It is recommended that host shall not trigger RSSI_ACQ input again until RSSI data is valid inI2C from previous RSSI trigger. b) RSSI DDM working range is between -8 to -28dBm. RSSI DDM accuracy is better than +/-3dB for input power level between -10 to -28dBm, the accuracy reduces to +/-5dBm to -10 dBm. If the data pattern is at least 2^7-1 or longer, a minimum average of 8 times is strongly recommended to maintain the RSSI reading accuracy.

EEPROM Serial ID Memory Contents (A0h)
Address	Size(Bytes)	Name of Field	Hex	Description of Field
0	1	Identifier	3	SFP
1	1	Ext. Identifier	4	MOD4
2	1	Connector	1	SC
3—10	8	Transceiver	00 00 00 00 00 00 00 00	Transceiver Code Field,not applicable
11	1	Encoding	3	NRZ encoding
12	1	BR, nominal	19	2488.32Mbps
13	1	Reserved	0	Reserved
14	1	Length(9um)-km	14	20(Units of km)
15	1	Length (9um)	C8	200(Units of 100 m)
16	1	Length (50um)	0	Not Support MMF
17	1	Length (62.5um)	0	Not Support MMF
18	1	Length (copper)	0	Not Support Copper
19	1	Reserved	0	–
20—35	16	Vendor name	XXXXX	“ODI”
36	1	Reserved	0	–
37—39	3	Vendor OUI	0	–
40—55	16	Vendor PN	XXXXX	“PART NUMBER ” (ASCⅡ)
56—59	4	Vendor rev	xxxx xxxx	ASCⅡ (“31 2E 31 20” means 1. 1 revision)
60-61	2	Wavelength	05 D2	1490nm Laser wavelength
62	1	Reserved	0	–
63	1	CC BASE	xx	Checksum of bytes 0 – 62
64—65	2	Options	00 1A	LOS, TX_FAULT and TX_DISABLE
66	1	BR, max	0	–
67	1	BR, min	0	–
68—83	16	Vendor SN	xxxx xxxx xxxx xxxx xxxx xxxx xxxx xxxx	SN ：xxxxxxxxx (ASCⅡ)
84—91	8	Vendor date code	xxxx xxxx xxxx 20 20	Year (2 bytes), Month (2 bytes), Day (2 bytes) (ASCⅡ)
92	1	Diagnostic type	58	Externally Calibrated
93	1	Enhanced option	B0	Diagnostic(Optional Alarm/warning flags) Soft TX_FAULT monitoring implemented Soft RX_LOS monitoring implemented
94	1	SFF-8472	1	Includes functionality described in Rev 9. 4 SFF-8472
95	1	CC_EXT	xx	Checksum of bytes 64 – 94
96—127	32	Vendor specific	–	Vendor Specific EEPROM
128-255	128	Reserved	–	Reserved for future use.
Note： 1.The“ xx” byte should be filled in according to practical case. 2. Note that, A0H is readable and writeable , A2H is readable and write-protected.

Pins Assignment

Function Definition
Pin No.	Name	Function	Plug Seq.	Notes
1	VeeT	Tx Ground	1	–
2	TX Fault	Transmitter Fault Indication,LVTTL Output Active High	3	Note 1
3	TX Disable	Transmitter Disable,LVTTL input.	3	Note 2
4	MOD-DEF2	2-Write Serial Data I/O Pin.	3	Note 3
5	MOD-DEF1	2-Write Serial Data I/O Pin.	3	Note 3
6	MOD-DEF0	Internally Grounded	3	Note 3
7	Reset	CMOS input.Assert “Reset”high at the end of previous burst,2 byte in duration	3	–
8	BRST_Det	LVTTL output.BRST_Det assert low when module receives“reset”signal, assert high when incoming burst is present.	3	Note 4
9	RSSI_ACQ	RSSI acquire/hold LVTTL input. Digital RSSI output through I2C	1	–
10	VeeR	Receiver Ground	1	–
11	VeeR	Receiver Ground	1	–
12	RD-	Inv. Received Data Out	3	Note 5
13	RD+	Received Data Out	3	Note 5
14	VeeR	Receiver Ground	1	–
15	VccR	Receiver Power	2	–
16	VccT	Transmitter Power	2	–
17	VeeT	Transmitter Ground	1	–
18	TD+	Transmit Data In	3	Note 6
19	TD-	Inv Transmit Data In	3	Note 6
20	VeeT	Transmitter Ground	1	–
Notes: 1. TX Fault is an open collector output, which should be pulled up with a 4.7K~10KΩ resistor on the host board to a voltage between 2.0V and Vcc+0.3V. Logic 0 indicates normal operation; logic 1 indicates a laser fault of some kind. In the low state, the output will be pulled to less than 0.8V.2. TX Disable is an input that is used to shut down the transmitter optical output. It is pulled up within the module with a 4.7K~10KΩ resistor. Its states are: Low (0~0.8V): Transmitter on (>0.8V, <2.0V): Undefined High (2.0~3.465V): Transmitter Disabled Open:Transmitter Disabled.3. MOD-DEF 0,1,2 are the module definition pins. They should be pulled up with a 4.7K~10KΩ resistor on the host board. The pull-up voltage shall be VccT or VccR. MOD-DEF 0 is grounded by the module to indicate that the module is present. MOD-DEF 1 isthe clock line of two wire serial interface for serial ID. MOD-DEF 2 isthe data line of two wire serial interface for serial ID.4. LOS is an open collector output, which should be pulled up with a 4.7K~10KΩ resistor on the host board to a voltage between 2.0V and Vcc+0.3V. Logic 0 indicates normal operation; logic 1 indicates loss of signal. In the low state, the output will be pulled to less than 0.8V. 5. These are the differential receiver outputs. They are AC coupled 100Ω differential lines which should be terminated with 100Ω (differential) atthe user SERDES. 6. These are the differential transmitter inputs. They are AC-coupled, differential lines with 100Ω differential termination inside the module.

PRODUCT CERTIFICATION

QUALITY ADVANTAGE

COMPATIBLE BRANDS

CONFIGURATION INFORMATION

The form can be filled in the actual website url.

Generic Compatible C+++ 8dBm GPON OLT 2.5/1.25G 1490/1310nm 20km Simplex SC SMF DOM Optical Transceiver Module最先出现在www.philisun.com。

Generic Compatible B+ 3dBm GPON OLT 2.5/1.25G 1490/1310nm 20km Simplex SC SMF DOM Optical Transceiver Module

philisun001 — Tue, 12 May 2026 09:52:32 +0000

SPECIFICATIONS
Product Model	SFP-GPON-B+2.5/1.25-1413-20-SCS	Manufacturer Brand	PHILISUN
Package Type	SFP	Optical Connector	SC
Max Data Rate	2.5/1.25Gbps	Class	B+
Effective transmission distance	20KM
Wavelength	1310nm/1490nm 1490nm/1310nm	Operating Voltage	3.3V
Fiber Type	SMF	Core Size	9/125µm
Transmitter Type	DFB	Receiver Type	APD
TX Power	2.5~3dBm	Receiver Sensitivity	-30dBm
Digital Diagnostic Monitoring(DDM)	YES	Receiver Overload	-8dBm
Power Consumption	<1W	Protocols	SFP MSA SFF-8472
Operating temperature(Commercial)	0℃~+70℃	Storage Temperature(Commercial)	-40℃~+85℃
Operating temperature(Industrial)	-40℃~+85℃	Storage Temperature(Industrial)	-40℃~+85℃

PRODUCT PRESENTATION

The PHILISUN GPON OLT B+ 3dBm Transceiver is a SFP module engineered for Optical Line Terminal applications, delivering asymmetric transmission at 2.488Gbps downstream (1490nm) and 1.244Gbps upstream (1310nm) over single-mode fiber with 20km reach. Featuring an SC/UPC connector and compliant with the GPON B+ class (3dBm optical budget), this transceiver integrates bidirectional communication on a single fiber while supporting Digital Diagnostic Monitoring (DDM) per SFF-8472 for real-time performance tracking. It fully meets ITU-T G.984.2 standards and RoHS compliance requirements.

TRANSCEIVER SERIES PRODUCTS

PRODUCTION & TESTING EQUIPMENT

PERFORMANCE PARAMETER

Absolute Maximum Ratings
Parameter	Symbol	Min.	Max.	Unit
Storage Temperature	TS	-40	+85	℃
Operating Temperature	Top	0	+70	℃
Supply Voltage	VCC	-0.5	+3.6	V
Power Supply Current	ICC	–	400	mA
Voltage at Any Input Pin	VIN	0	Vcc	V

Recommended Operating Environment
Parameter	Symbol	Min.	Typical	Max.	Unit
Operating Temperature	Top	0	–	+70	℃
Supply Voltage	VCC	3.1	3.3	3.5	V
Tx Data Rate	–	–	2488	–	Mb/s
Rx Data Rate	–	–	1244	–	Mb/s

Electrical
Parameter	Symbol	Min.		Typ.	Max.	Unit
Transmitter（T=0 to +70℃, VCC =3.1~3.5V)
Central Wavelength	λC	1480		1490	1500	nm
Spectral Width	Δλ	–		–	1	nm
Side Mode Suppression Ratio	SMSR	30		–	–	dB
Output Power	Po	2.5		–	3	dBm
Extinction Ratio	ER	8.2		–	–	dB
Output Power at Transmit Off	–	–		–	-40	dBm
Differential Input Voltage	VIH- VIL	200		–	1600	mV
TX Disable Input Voltage Low	TX_DISABLEL	0		–	0.8	V
TX Disable Input Voltage High	TX_DISABLEH	2		–	Vcc	V
TX Fault Output Voltage Low	TX_FAULTL	0		–	0.8	V
TX Fault Output Voltage High	TX_FAULTH	2		–	VCC+0.3	V
Eye Diagram	Compliance with ITU-T G.984.2
Receiver（T=0 to +70℃, VCC =3.1~3.5V)
Wavelength Range	λ		1260	–	1360	nm
MIN. Input Power (Sensitivity)	PMIN		–	–	-30	dBm
MAX. Input Power (Saturation)	PMAX		-12	–	–	dBm
Signal Detect-Asserted	PA		–	–	-30	dBm
Signal Detect-Deasserted	PD		-45	–	–	dBm
Signal Detect Hysteresis	PHYS		0.5	–	6	dB
Return Loss	ORL		12	–	–	dB
RX Loss of Signal Output Voltage Low	RX_LOSL		0	–	0.8	V
RX Loss of Signal Output Voltage High	RX_LOSH		2	–	VCC+0.3	V
LOS Assert Time	TAssert		–	–	100	ns
LOS De-assert Time	TDeassert		–	–	12.8	ns

Digital RSSI Timing Specification
Parameter	Minimum	Typical	Maximum	Unit	Notes
RSSI Trigger Delay	25	–	–	ns	–
RSSI Sampling Time	300	–	–	ns	–
Internal I2C Delay	–	–	500	us	–
Receiver Power DDM(RSSI) Error	–	–	+/-3	dB	–
a) RSSI_ACQ input signal rising edge will trigger RSSI sampling, and falling edge will trigger internal digital RSSI information written to I2C. It is recommended that host shall not trigger RSSI_ACQ input again until RSSI data is valid inI2C from previous RSSI trigger. b) RSSI DDM working range is between -8 to -28dBm. RSSI DDM accuracy is better than +/-3dB for input power level between -10 to -28dBm, the accuracy reduces to +/-5dBm to -10 dBm. If the data pattern is at least 2^7-1 or longer, a minimum average of 8 times is strongly recommended to maintain the RSSI reading accuracy.

EEPROM Serial ID Memory Contents (A0h)
Address	Size(Bytes)	Name of Field	Hex	Description of Field
0	1	Identifier	3	SFP
1	1	Ext. Identifier	4	MOD4
2	1	Connector	1	SC
3—10	8	Transceiver	00 00 00 00 00 00 00 00	Transceiver Code Field,not applicable
11	1	Encoding	3	NRZ encoding
12	1	BR, nominal	19	2488.32Mbps
13	1	Reserved	0	Reserved
14	1	Length(9um)-km	14	20(Units of km)
15	1	Length (9um)	C8	200(Units of 100 m)
16	1	Length (50um)	0	Not Support MMF
17	1	Length (62.5um)	0	Not Support MMF
18	1	Length (copper)	0	Not Support Copper
19	1	Reserved	0	–
20—35	16	Vendor name	XXXXX	“ODI”
36	1	Reserved	0	–
37—39	3	Vendor OUI	0	–
40—55	16	Vendor PN	XXXXX	“PART NUMBER ” (ASCⅡ)
56—59	4	Vendor rev	xxxx xxxx	ASCⅡ (“31 2E 31 20” means 1. 1 revision)
60-61	2	Wavelength	05 D2	1490nm Laser wavelength
62	1	Reserved	0	–
63	1	CC BASE	xx	Checksum of bytes 0 – 62
64—65	2	Options	00 1A	LOS, TX_FAULT and TX_DISABLE
66	1	BR, max	0	–
67	1	BR, min	0	–
68—83	16	Vendor SN	xxxx xxxx xxxx xxxx xxxx xxxx xxxx xxxx	SN ：xxxxxxxxx (ASCⅡ)
84—91	8	Vendor date code	xxxx xxxx xxxx 20 20	Year (2 bytes), Month (2 bytes), Day (2 bytes) (ASCⅡ)
92	1	Diagnostic type	58	Externally Calibrated
93	1	Enhanced option	B0	Diagnostic(Optional Alarm/warning flags) Soft TX_FAULT monitoring implemented Soft RX_LOS monitoring implemented
94	1	SFF-8472	1	Includes functionality described in Rev 9. 4 SFF-8472
95	1	CC_EXT	xx	Checksum of bytes 64 – 94
96—127	32	Vendor specific	–	Vendor Specific EEPROM
128-255	128	Reserved	–	Reserved for future use.
Note： 1.The“ xx” byte should be filled in according to practical case. 2. Note that, A0H is readable and writeable , A2H is readable and write-protected.

Pins Assignment

Function Definition
Pin No.	Name	Function	Plug Seq.	Notes
1	VeeT	Tx Ground	1	–
2	TX Fault	Transmitter Fault Indication,LVTTL Output Active High	3	Note 1
3	TX Disable	Transmitter Disable,LVTTL input.	3	Note 2
4	MOD-DEF2	2-Write Serial Data I/O Pin.	3	Note 3
5	MOD-DEF1	2-Write Serial Data I/O Pin.	3	Note 3
6	MOD-DEF0	Internally Grounded	3	Note 3
7	Reset	CMOS input.Assert “Reset”high at the end of previous burst,2 byte in duration	3	–
8	BRST_Det	LVTTL output.BRST_Det assert low when module receives“reset”signal, assert high when incoming burst is present.	3	Note 4
9	RSSI_ACQ	RSSI acquire/hold LVTTL input. Digital RSSI output through I2C	1	–
10	VeeR	Receiver Ground	1	–
11	VeeR	Receiver Ground	1	–
12	RD-	Inv. Received Data Out	3	Note 5
13	RD+	Received Data Out	3	Note 5
14	VeeR	Receiver Ground	1	–
15	VccR	Receiver Power	2	–
16	VccT	Transmitter Power	2	–
17	VeeT	Transmitter Ground	1	–
18	TD+	Transmit Data In	3	Note 6
19	TD-	Inv Transmit Data In	3	Note 6
20	VeeT	Transmitter Ground	1	–
Notes: 1. TX Fault is an open collector output, which should be pulled up with a 4.7K~10KΩ resistor on the host board to a voltage between 2.0V and Vcc+0.3V. Logic 0 indicates normal operation; logic 1 indicates a laser fault of some kind. In the low state, the output will be pulled to less than 0.8V. 2. TX Disable is an input that is used to shut down the transmitter optical output. It is pulled up within the module with a 4.7K~10KΩ resistor. Its states are: Low (0~0.8V): Transmitter on (>0.8V, <2.0V): Undefined High (2.0~3.465V): Transmitter Disabled Open:Transmitter Disabled. 3. MOD-DEF 0,1,2 are the module definition pins. They should be pulled up with a 4.7K~10KΩ resistor on the host board. The pull-up voltage shall be VccT or VccR. MOD-DEF 0 is grounded by the module to indicate that the module is present. MOD-DEF 1 isthe clock line of two wire serial interface for serial ID. MOD-DEF 2 isthe data line of two wire serial interface for serial ID. 4. LOS is an open collector output, which should be pulled up with a 4.7K~10KΩ resistor on the host board to a voltage between 2.0V and Vcc+0.3V. Logic 0 indicates normal operation; logic 1 indicates loss of signal. In the low state, the output will be pulled to less than 0.8V. 5. These are the differential receiver outputs. They are AC coupled 100Ω differential lines which should be terminated with 100Ω (differential) atthe user SERDES. 6. These are the differential transmitter inputs. They are AC-coupled, differential lines with 100Ω differential termination inside the module.

PRODUCT CERTIFICATION

QUALITY ADVANTAGE

COMPATIBLE BRANDS

CONFIGURATION INFORMATION

The form can be filled in the actual website url.

Generic Compatible B+ 3dBm GPON OLT 2.5/1.25G 1490/1310nm 20km Simplex SC SMF DOM Optical Transceiver Module最先出现在www.philisun.com。