QSFP56 200G Series – www.philisun.com https://www.philisun.com Optical transceivers support <strong>10G to 800G</strong> high-speed transmission Tue, 02 Dec 2025 08:53:19 +0000 en-US hourly 1 https://www.philisun.com/wp-content/uploads/2025/10/philisun斐立飒-logo彩色方形-1-100x100.png QSFP56 200G Series – www.philisun.com https://www.philisun.com 32 32 Generic Compatible 200GBASE-SR4 QSFP56 850nm 100m DOM MPO 8/12 MMF Optical Transceiver Module https://www.philisun.com/products/200g-850nm-100m-sr4-mpo-8-12/ Mon, 10 Nov 2025 08:29:56 +0000 https://www.philisun.com/?post_type=product&p=2487 QSFP56-200-85-01(SR4)-MPO8/12

Generic Compatible 200GBASE-SR4 QSFP56 850nm 100m DOM MPO 8/12 MMF Optical Transceiver Module最先出现在www.philisun.com。

]]>
SPECIFICATIONS
Product ModelQSFP56-200-85-01(SR4)-MPO8/12Manufacturer BrandPHILISUN
Package TypeQSFP56Optical ConnectorMPO 8C/12C
Max Data Rate200GbpsChannel Data Rate53.125Gbps
Effective transmission distance(OM3)70mEffective transmission distance(OM4)100m
Wavelength850nmOperating Voltage3.3V
Fiber TypeMMFCore Size50/125µm
Transmitter TypeVCSELReceiver TypePIN
TX Power-8.4~4.0dBmReceiver Sensitivity-6.5dBm
Digital Diagnostic Monitoring(DDM)YESReceiver Overload4dBm
Power ConsumptionTSOM4-NAALA1C-01<5.5W
TSOM4-NAALA1C-02<6W		Protocols200G BASE-SR4 Ethernet
Operating temperature(Commercial)0℃~+70℃Storage Temperature(Commercial)-40℃~+85℃

 

PRODUCT PRESENTATION
The PHILISUN QSFP56 200G 850nm 100m SR4 MPO 8/12 Transceiver is a high-performance, pluggable fiber-optic module designed for 200Gbps short-range (SR) applications. It features four channels, each operating at 53.125Gbps, and supports data transmission distances of up to 70 meters over OM3 fiber and 100 meters over OM4 fiber. The transceiver employs an MPO receptacle for its optical interface and utilizes a 38-contact edge-type connector for its electrical interface. Optimized for multimode fiber systems, it operates at a nominal wavelength of 850nm, making it ideal for efficient and reliable short-range data communication and interconnect solutions.

 

TRANSCEIVER SERIES PRODUCTS

 

PRODUCTION & TESTING EQUIPMENT

 

PERFORMANCE PARAMETER
Absolute Maximum Ratings
Parameter Symbol Min. Max. Unit
Power supply voltage VCC -0.5 +3.6 V
Storage temperature TC -40 +85 ℃
Relative humidity RH 5 85 %
These values represent the damage threshold of the module.Stress in excess of any of the individual absolute maximum ratingscan cause immediate catastrophic damage to the module even if all other parameters are within recommended operating conditions.

 

Recommended Operating Environment
Parameter Symbol Min Typical Max Unit
Power supply voltage VCC 3.15 3.30 3.45 V
Operating case temperature Tca 0 – 70 ℃
Recommended  operating environment specifies parameters for which the electrical and optical characteristics hold unless otherwise noted.

 

Electrical Characteristics
Parameter
Symbol
 Min Typical Max Unit Notes
Data rate per lane DR – 53.125 – Gbps –
Transmitter
Single ended output voltage tolerance – -0.3 – 4.0 V –
Common mode voltage tolerance – 15 – – mV –
Input differential impedance Rin – 100 – Ω –
Differential input voltage swing Vin 300 – 1100 mV –
Tx fault VoL -0.3 – 0.4 V At 0.7mA
Receiver
Single ended output voltage
tolerance		 – -0.3 – 4 V –
Differential output swing Vout 300 – 900 mV
–
Output differential impedance Rout – 100 – Ω –
The following electrical characteristics are defined over the recommended operating environment unless otherwise specified.

 

Optical Characteristics
Parameter Symbol Min
Typical
Max
 Unit Notes
Transmitter
Center wavelength λ 820 850 880
nm
 –
RMS spectral width Pm – – 0.6 nm 1
Average optical power Po -6.5 – 4 dBm 2
Extinction ratio ER 3 – – dBm –
Optical modulation amplitude OMA -4.5 – 3 dB –
Transmitter and dispersion eye closure TDECQ – – 4.5 dB –
Optical return loss tolerance ORL – – 12 dB –
Receiver
Center wavelength λ 820 – 880 nm
–
Average receive power,each lane – -8.4 – 4 dBm –
Receive power(OMAouter),each lane – – – 4 dBm –
Receiver sensitivity(OMAAut) Psens – – -6.5 dBm 3
LOS asserted Lsa -30 – – dBm –
LOS De-asserted Lda – – -10 dBm –
LOS hysteresis Lh 0.5 – – dB –
Note:
[1]Trade-offs  are  available  between  spectral  width,center  wavelength  and  minimum  OMA.
[2]The optical  power  is  launched  into  MMF
[3]BER=2.4E-4;PRBS31Q@26.5625GBd.Pre-FEC

 

QSFP56 TRANSCEIVER ELECTRICAL PAD LAYOUT

 

PIN DEFINITION
Pin Symbol Name/Description
1 GND Ground
2 Tx2n Transmitter inverted data input
3 Tx2p Transmitter non-inverted data input
4 GND Ground
5 Tx4n Transmitter inverted data input
6 Tx4p Transmitter non-inverted data input
7 GND Ground
8 ModSelL Module select
9 ResetL Module reset
10 VCCRx +3.3V power supply receiver
11 SCL 2-wire serial interface clock
12 SDA 2-wire serial interface data
13 GND Ground
14 Rx3p Receiver non-inverted data output
15 Rx3n
Receiver inverted data output
16 GND Ground
17 Rxlp Receiver non-inverted data output
18 Rx1n Receiver inverted data output
19 GND Ground
20 GND Ground
21 Rx2n Receiver inverted data output
22 Rx2p Receiver non-inverted data output
23 GND Ground
24 Rx4n Receiver inverted data output
25 Rx4p Receiver non-inverted data output
26 GND Ground
27 ModPrsL Module present
28 IntL Interrupt
29 VCCTx +3.3V power supply transmitter
30 VCC1 +3.3V power Supply
31 LPMode Low power mode
32 GND Ground
33 Tx3p Transmitter non-inverted data input
34 Tx3n Transmitter inverted data input
35 GND Ground
36 Txlp Transmitter non-inverted dataInput
37 Tx1n Transmitter inverted data input
38 GND Ground

 

PRODUCT CERTIFICATION

 

QUALITY ADVANTAGE

 

COMPATIBLE BRANDS
CONFIGURATION INFORMATION
The form can be filled in the actual website url.

 

Generic Compatible 200GBASE-SR4 QSFP56 850nm 100m DOM MPO 8/12 MMF Optical Transceiver Module最先出现在www.philisun.com。

]]>