200G QSFP56 AOC Cables – www.philisun.com https://www.philisun.com Optical transceivers support <strong>10G to 800G</strong> high-speed transmission Thu, 19 Mar 2026 05:08:31 +0000 en-US hourly 1 https://www.philisun.com/wp-content/uploads/2025/10/philisun斐立飒-logo彩色方形-1-100x100.png 200G QSFP56 AOC Cables – www.philisun.com https://www.philisun.com 32 32 200G QSFP56 to 4×50G SFP56 Active Optical Cable(AOC) https://www.philisun.com/products/200g-qsfp56-4-50g-sfp56-aoc/ Fri, 21 Nov 2025 05:41:52 +0000 https://www.philisun.com/?post_type=product&p=3480 Compliant with the SFF-8436 QSFP56 MSA standard
Switch to Switch
Switch to GPU

200G QSFP56 to 4×50G SFP56 Active Optical Cable(AOC)最先出现在www.philisun.com。

]]>
SPECIFICATIONS
Cable End Connector AQSFP56Cable End Connector B4×SFP56
Jumper TypeActive Optical Breakout CableData Rate200G
Aggregate Bit Rate212.5GbpsLane Bit Rate53.125Gbps
Number of Channels4Single Channel Rate50G
Array TransmitterVSCELArray ReceiverPIN
Minimum Bend Radius30mmFactory BrandPHILISUN
Center(Operating) Wavelength850nmBit Error Rate2.4E-4
Fiber TypeOM3 MMF MAX 70mCable ColourAqua
Cable MaterialLSZH/OFNPCable Length Selection1-70meter
Safety CertificationTUV/UL/FDAApplication Scenarios200 Gigabit Ethernet (200GbE)
ProtocolsQSFP56 MSA/SFP56 MSADDMI(Commercial)YES
Supply Voltage3.3VPower DissipationQSFP56:<5.5W
SFP56:<3.0W
Operating Temperature0 to 70℃ (32 to 158℉)Storage Temperature-20 to 85℃ (-4 to 185℉)

 

PRODUCT PRESENTATION
The PHILISUN 200G QSFP56 to 4×50G SFP56 Active Optical Breakout Cable is a direct-attach fiber assembly designed for linking 200G devices to 50G devices. The product complies with SFF-8436, SFF-8431, and MSA standards and is suitable for heterogeneous connections across adjacent racks. It uses OM3 Multimode Fiber. Its compact structure and fully sealed integrated optics reduce costs compared to conventional optical modules and jumpers, while significantly improving reliability and reducing maintenance. This AOC guarantees broad compatibility with major vendor platforms including Cisco, H3C, Huawei, Juniper, and Arista, and more.

 

AOC SERIES PRODUCTS

 

PRODUCTION & TESTING EQUIPMENT

 

PERFORMANCE PARAMETER
Absolute Ratings
Parameter Symbol Min Max Unit
Storage Temperature Tc -40 + 85 ℃
Case Operating Temperature Tc 0 +70 ℃
Supply Voltage VccT,  R – 3.3 V
Relative Humidity     RH 0 85 %

 

Recommended Operating Environment
Parameter Min Max Unit
Supply Voltage 3.15 3.3 V
Supply current QSFP56 end – 1660 mA
Supply current SFP56 end – 900 mA
Data Rate Per Lane – 53.125 Gbps
Fiber Bend Radius 30 – mm

 

Transmitter Specifications
Parameter Min Max Unit
Input differential impedance 90 110 Ω
Differential Input Voltage swing, per lane 300 1100 mV
Transmit Disable Voltage 2.0 VCC+0.3 V
Transmit Enable Voltage Vee Vee+0.8 V

 

Receiver Specifications
Parameter Min Max Unit
Differential Output Swing, per lane 300 900 mV
Bit Error Rate@53.125 Gbps – 2.4E-4 –
Bit Error Rate@25.78125 Gbps – 5E-5 –
Output Differential Impedance 90 110 Ω
Loss of Signal -Asserted 2.0 VCC+0.3 V
Loss of Signal -Negated Vee Vee+0.8 V

 

TRANSCEIVER ELECTRICAL PAD LAYOUT（QSFP56 end）

 

PIN DESCRIPTION（QSFP56 end）
Pin Name Name/Description
1 GND Ground
2 Tx2n Transmitter Inverted Data Input
3 Tx2p Transmitter Non-Inverted Data Input
4 GND Ground
5 Tx4n Transmitter Inverted Data Input
6 Tx4p Transmitter Non-Inverted Data Input
7 GND Ground
8 ModSelL Module Select
9 ResetL Module Reset
10 Vcc Rx +3.3 V Power supply receiver
11 SCL 2-wire serial interface clock
12 SDA 2-wire serial interface data
13 GND Ground
14 Rx3p Receiver Non-Inverted Data Output
15 Rx3n Receiver Inverted Data Output
16 GND Ground
17 Rx1p Receiver Non-Inverted Data Output
18 Rx1n Receiver Inverted Data Output
19 GND Ground
20 GND Ground
21 Rx2p Receiver Inverted Data Output
22 GND Receiver Non-Inverted Data Output
23 Rx4n Ground
Pin Name Name/Description
24 Rx4n Receiver Inverted Data Output
25 Rx4p Receiver Non-Inverted Data Output
26 GND Ground
27 Mod PrsL Module Present
28 IntL Interrupt
29 VCC Tx +3.3 V Power supply transmitter
30 VCC1 +3.3 V Power Supply
31 LPMode Low Power Mode
32 GND Ground
33 Tx3p Transmitter Non-Inverted Data Input
34 Tx3n Transmitter Inverted Data Input
35 GND Ground
36 Tx1p Transmitter Non-Inverted Data Input
37 Tx1n Transmitter Inverted Data Input
38 GND Ground

 

TRANSCEIVER ELECTRICAL PAD LAYOUT（SFP56 end）

 

PIN DESCRIPTION（SFP56 end）
Pin Name Name/Description
1 VEET Transmitter Ground
2 Tx_FAULT Transmitter Fault
3 Tx_DIS Transmitter Disable. Laser output disabled on high or open
4 SDA 2-wire Serial Interface Data Line
5 SCL 2-wire Serial Interface Clock Line
6 MOD_ABS Module Absent. Grounded within the module
7 RS0 Rate Select 0
Pin Name Name/Description
8 RX_LOS Loss of Signal indication. Logic 0 indicates normal operation
9 RS1 Rate Select 1
10 VEER Receiver Ground
11 VEER Receiver Ground
12 RD- Receiver Inverted DATA out. AC Coupled
13 RD+ Receiver DATA out. AC Coupled
14 VEER Receiver Ground
15 VCCR Receiver Power Supply
16 VCCT Transmitter Power Supply
17 VEET Transmitter Ground
18 TD+ Transmitter DATA in. AC Coupled
19 TD- Transmitter Inverted DATA in. AC Coupled
20 VEET Transmitter Ground

 

PRODUCT CERTIFICATION

 

COMPATIBLE BRANDS
CONFIGURATION INFORMATION
The form can be filled in the actual website url.

 

200G QSFP56 to 4×50G SFP56 Active Optical Cable(AOC)最先出现在www.philisun.com。

]]> 200G QSFP56 to 2×100G QSFP56 Active Optical Cable(AOC) https://www.philisun.com/products/200g-qsfp56-2-100-qsfp56-aoc/ Fri, 21 Nov 2025 03:33:13 +0000 https://www.philisun.com/?post_type=product&p=3470 Compliant with the SFF-8665 QSFP56 MSA standard
Switch to Switch
Switch to GPU

200G QSFP56 to 2×100G QSFP56 Active Optical Cable(AOC)最先出现在www.philisun.com。

]]>
SPECIFICATIONS
Cable End Connector AQSFP56Cable End Connector B2×QSFP56
Jumper TypeActive Optical Breakout CableData Rate200G
Aggregate Bit Rate212.5GbpsLane Bit Rate53.125Gbps
Number of Channels4Single Channel Rate50G
Array TransmitterVSCELArray ReceiverPIN
Minimum Bend Radius30mmFactory BrandPHILISUN
Center(Operating) Wavelength850nmBit Error Rate2.4E-4
Fiber TypeOM3 MMF MAX 70mCable ColourAqua
Cable MaterialLSZH/OFNPCable Length Selection1-70meter
Safety CertificationTUV/UL/FDAApplication Scenarios200 Gigabit Ethernet (200GbE)
ProtocolsIEEE 802.3，QSFP56 MSA，SFF-8024，SFF-8679，SFF-8665，SFF-8636DDMI(Commercial)YES
Supply Voltage3.3VPower Dissipation<4.5W
Operating Temperature0 to 70℃ (32 to 158℉)Storage Temperature-20 to 85℃ (-4 to 185℉)

 

PRODUCT PRESENTATION
This QSFP56 to 2×100G QSFP56 breakout active optical cable uses multi‑mode fiber (MMF).It complies with IEEE 802.3, QSFP56 MSA, SFF-8024, SFF-8679, SFF-8665, and SFF-8636.It links one 200G QSFP56 port to two 100G QSFP56 ports, ideal for high‑speed connections within and between adjacent racks.

 

AOC SERIES PRODUCTS

 

PRODUCTION & TESTING EQUIPMENT

 

PERFORMANCE PARAMETER
Absolute Maximum Ratings
Parameter Symbol Min Typical Max Unit
Storage Temperature TS -20 – 85 ℃
Relative Humidity RH 0 – 85 %
Case Operating Temperature TCase 0 – 70 ℃
Supply Voltage VCC -0.5 – 3.6 V

 

Transmitter Specifications
Parameter Symbol Min. Typ. Max. Unit
Signaling Speed per Lane PRBS31Q@26.5625Gbd PAM4 Gb/s
Center Wavelength C 840 850 860 nm
Differential Input Impedance Zin 90 100 110 Ohm
Differential Input Voltage Vin – 900 – mVp-p
Differential termination mismatch – – – 10 %
DC common mode voltage – -350 – 2850 mV

 

Receiver Specifications
Parameter Symbol Min. Typ. Max. Unit
Signaling Speed per Lane PRBS31Q@26.5625Gbd PAM4 Gb/s
Center Wavelength C 840 850 860 nm
Differential Input Impedance – – – 10 %
Differential Input Voltage Zout 90 100 110 Ohm
Differential termination mismatch Vout – – 900 mVp-p
DC common mode voltage – -350 – 2850 mV
Error Bit Rate BER – – 2.4E-4 PRBS31Q@26.5
625Gbd PAM4

 

Recommended Operating Environment
Parameter Symbol Min Typical Max Unit
Power Supply Voltage VCC 3.135 3.300 3.465 V
Operating Case Temperature TC 0 25 70 ℃
Power dissipation
(200G retiming on all lanes)		 Pd200G – – 4.5 W
Power dissipation
(100G retiming on all lanes)		 Pd100G – – 2.5 W

 

PIN DESCRIPTIONS

 

PIN DEFINITION RECEIVER SPECIFICATIONS
Pin Symbol Name/Description
1 GND Ground
2 Tx2n Transmitter Inverted Data Input
3 Tx2p Transmitter Non-Inverted Data Input
4 GND Ground
5 Tx4n Transmitter Inverted Data Input
6 Tx4p Transmitter Non-Inverted Data Input
7 GND Ground
8 ModSelL Module Select
9 ResetL Module Reset
10 Vcc Rx +3.3 V Power supply receiver
11 SCL 2-wire serial interface clock
12 SDA 2-wire serial interface data
13 GND Ground
14 Rx3p Receiver Non-Inverted Data Output
15 Rx3n Receiver Inverted Data Output
16 GND Ground
17 Rx1p Receiver Non-Inverted Data Output
18 Rx1n Receiver Inverted Data Output
19 GND Ground
20 GND Ground
21 Rx2n Receiver Inverted Data Output
22 Rx2p Receiver Non-Inverted Data Output
23 GND Ground
24 Rx4n Receiver Inverted Data Output
25 Rx4p Receiver Non-Inverted Data Output
26 GND Ground
27 ModPrsL Module Present
28 IntL Interrupt
29 Vcc Tx +3.3 V Power supply transmitter
30 Vcc1 +3.3 V Power Supply
31 LPMode Low Power Mode
32 GND Ground
33 Tx3p Transmitter Non-Inverted Data Input
34 Tx3n Transmitter Inverted Data Input
35 GND Ground
36 Tx1p Transmitter Non-Inverted Data Input
37 Tx1n Transmitter Inverted Data Input
38 GND Ground

 

PRODUCT CERTIFICATION

 

COMPATIBLE BRANDS
CONFIGURATION INFORMATION
The form can be filled in the actual website url.

 

200G QSFP56 to 2×100G QSFP56 Active Optical Cable(AOC)最先出现在www.philisun.com。

]]> 200G QSFP56 to QSFP56 Active Optical Cable (AOC) https://www.philisun.com/products/qsfp56-200g-aoc/ Fri, 21 Nov 2025 02:42:54 +0000 https://www.philisun.com/?post_type=product&p=3458 Compliant with theSFF-8436 QSFP56 MSA standard
Switch to Switch
Switch to GPU

200G QSFP56 to QSFP56 Active Optical Cable (AOC)最先出现在www.philisun.com。

]]>
SPECIFICATIONS
Cable End Connector AQSFP56Cable End Connector BQSFP56
Jumper TypeDirect-AttachData Rate200G
Aggregate Bit Rate212.5GbpsLane Bit Rate53.125Gbps
Number of Channels4Single Channel Rate50G
Array TransmitterVSCELArray ReceiverPIN
Minimum Bend Radius30mmFactory BrandPHILISUN
Center(Operating) Wavelength850nmBit Error Rate2.4E-4
Fiber TypeOM3 MMF MAX 70m/OM4 MMF MAX 100mCable ColourAqua
Cable MaterialLSZH/OFNPCable Length Selection1-100meter
Safety CertificationTUV/UL/FDAApplication Scenarios200 Gigabit Ethernet (200GbE)
ProtocolsSFF-8665/SFF-8636/
IEEE 802.3/QSFP56 MSA		DDMI(Commercial)YES
Supply Voltage3.3VPower Dissipation<4.5W
Operating Temperature0 to 70℃ (32 to 158℉)Storage Temperature-20 to 85℃ (-4 to 185℉)

 

PRODUCT PRESENTATION
The PHILISUN QSFP56(200G) Active Optical Cable is a direct-attach fiber assembly utilizing QSFP56 connectors and the Multi-Mode Fiber (MMF) scheme. The product complies with the SFF-8665 MSA standard and is suitable for 200Gbps connections within racks and across adjacent racks. It uses OM3/OM4 Multimode Fiber. Its compact structure and fully sealed integrated optics reduce costs compared to conventional optical modules and jumpers, while significantly improving reliability and reducing maintenance. This AOC guarantees broad compatibility with major vendor platforms including Cisco, H3C, Huawei, Juniper, and Arista, and more.

 

AOC SERIES PRODUCTS

 

PRODUCTION & TESTING EQUIPMENT

 

PERFORMANCE PARAMETER
Absolute Maximum Ratings
Parameter Symbol Min Typical Max Unit
Storage Temperature TS -20 – 85 ℃
Relative Humidity RH 0 – 85 %
Case Operating Temperature TCase 0 – 70 ℃
Supply Voltage VCC -0.5 – 3.6 V

 

Transmitter Specifications
Parameter Symbol Min Typical Max Unit
Signaling Speed per Lane – PRBS31Q@26.5625Gbd PAM4 Gb/s
Center Wavelength C 840 850 860 nm
Differential Input Impedance Zin 90 100 110 Ohm
Differential Input Voltage Vin – 900 – mVp-p
Differential termination mismatch – – – 10 %
DC common mode voltage – -350 – 2850 mV

 

Receiver Specifications
Parameter Symbol Min Typical Max Unit
Signaling Speed per Lane – PRBS31Q@26.5625Gbd PAM4 Gb/s
Center Wavelength C 840 850 860 nm
Differential Input Impedance – – – 10 %
Differential Input Voltage Zout 90 100 110 Ohm
Differential termination mismatch Vout – – 900 mVp-p
DC common mode voltage – -350 – 2850 mV
Error Bit Rate BER – – 2.4E-4 PRBS31Q@26.5
625Gbd PAM4

 

Recommended Operating Environment
Parameter Symbol Min Typical Max Unit
Power Supply Voltage VCC 3.135 3.300 3.465 V
Operating Case Temperature TC 0 25 70 ℃

 

PIN DESCRIPTIONS

 

PIN DEFINITION RECEIVER SPECIFICATIONS
Pin Symbol Name/Description
1 GND Ground
2 Tx2n Transmitter Inverted Data Input
3 Tx2p Transmitter Non-Inverted Data Input
4 GND Ground
5 Tx4n Transmitter Inverted Data Input
6 Tx4p Transmitter Non-Inverted Data Input
7 GND Ground
8 ModSelL Module Select
9 ResetL Module Reset
10 Vcc Rx +3.3 V Power supply receiver
11 SCL 2-wire serial interface clock
12 SDA 2-wire serial interface data
13 GND Ground
14 Rx3p Receiver Non-Inverted Data Output
15 Rx3n Receiver Inverted Data Output
16 GND Ground
17 Rx1p Receiver Non-Inverted Data Output
18 Rx1n Receiver Inverted Data Output
19 GND Ground
20 GND Ground
21 Rx2n Receiver Inverted Data Output
22 Rx2p Receiver Non-Inverted Data Output
23 GND Ground
24 Rx4n Receiver Inverted Data Output
25 Rx4p Receiver Non-Inverted Data Output
26 GND Ground
27 ModPrsL Module Present
28 IntL Interrupt
29 Vcc Tx +3.3 V Power supply transmitter
30 Vcc1 +3.3 V Power Supply
31 LPMode Low Power Mode
32 GND Ground
33 Tx3p Transmitter Non-Inverted Data Input
34 Tx3n Transmitter Inverted Data Input
35 GND Ground
36 Tx1p Transmitter Non-Inverted Data Input
37 Tx1n Transmitter Inverted Data Input
38 GND Ground

 

PRODUCT CERTIFICATION

 

COMPATIBLE BRANDS
CONFIGURATION INFORMATION
The form can be filled in the actual website url.

 

200G QSFP56 to QSFP56 Active Optical Cable (AOC)最先出现在www.philisun.com。

]]>